Color Force II Plus 72 - Professional lighting Chrome-Q - Free user manual and instructions
Find the device manual for free Color Force II Plus 72 Chrome-Q in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Color Wash Light |
| Brand | Chrome-Q |
| Model | Color Force II Plus 72 |
| Light Source | 72 x 8W RGBW LEDs |
| Beam Angle | 25° (optional 15° or 45°) |
| Power Consumption | 200W maximum |
| Input Voltage | 100-240V AC, 50/60Hz |
| Dimensions (LxWxH) | 300 x 300 x 400 mm |
| Weight | 5.0 kg |
| Control Protocol | DMX512, RDM ready |
| DMX Channels | 4/6/8/10 channel modes |
| Color Mixing | RGBW with virtual color wheel |
| Strobe Rate | 0-25 Hz |
| Dimming Curve | 16-bit smooth dimming |
| Operating Temperature | -10°C to 45°C |
| Housing Material | Aluminum and steel |
| IP Rating | IP20 (indoor use only) |
| Cooling | Passive convection |
| Cleaning | Use a soft dry cloth; avoid solvents |
| Safety Features | Overheat protection, safety cable loop |
| Accessories Included | Power cable, mounting bracket, manual |
Frequently Asked Questions - Color Force II Plus 72 Chrome-Q
How do I connect the Color Force II Plus 72 to a DMX controller?
Use a standard 3-pin XLR cable to connect the fixture's DMX IN to the controller's DMX OUT. Set the DMX address using the control panel. Refer to the manual for channel mode selection.
What are the available DMX channel modes?
The fixture supports 4, 6, 8, and 10 channel modes. The 4-channel mode controls dimmer, red, green, blue. Higher modes add strobe, color macros, and white channels.
Can I use this fixture outdoors?
No, the Color Force II Plus 72 has an IP20 rating, meaning it is only suitable for indoor use. Exposure to rain or moisture may damage the unit.
How do I clean the lens?
Disconnect power and wait for the fixture to cool. Use a soft, lint-free cloth slightly dampened with water or a mild glass cleaner. Do not use abrasive cleaners or solvents.
What is the maximum power consumption?
The fixture consumes up to 200W at full output. Ensure your power supply can handle the total load if connecting multiple units.
How do I update the firmware?
Firmware updates are done via a USB connection to a PC using Chrome-Q's proprietary software. Download the latest firmware from the official website and follow the instructions.
Why is the fan not running?
The Color Force II Plus 72 uses passive cooling (no fan). It relies on natural convection, so ensure adequate ventilation around the fixture.
Can I mount the fixture upside down?
Yes, the fixture can be mounted in any orientation using the included mounting bracket. Always secure with a safety cable.
What is the lifespan of the LEDs?
The rated LED lifespan is approximately 50,000 hours under normal operating conditions. This may vary based on usage and environmental factors.
How do I reset the fixture to factory default?
Go to the menu, navigate to 'Factory Reset' or 'Default Settings' and confirm. This will reset all parameters to their original values.
User questions about Color Force II Plus 72 Chrome-Q
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Professional lighting in PDF format for free! Find your manual Color Force II Plus 72 - Chrome-Q and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Color Force II Plus 72 by Chrome-Q.
USER MANUAL Color Force II Plus 72 Chrome-Q
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Chrome-Q
Model : Color Force II Plus 72
Category : Professional lighting