ALF-30X-SDIC - Security Camera Alfatron - Free user manual and instructions
Find the device manual for free ALF-30X-SDIC Alfatron in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Security Camera |
| Brand | Alfatron |
| Model | ALF-30X-SDIC |
| Optical Zoom | 30x |
| Image Sensor | 1/2.8-inch CMOS |
| Maximum Resolution | 1920 x 1080 @ 60fps |
| Video Outputs | 3G-SDI, HDMI, IP (optional) |
| Pan Range | 360° continuous |
| Tilt Range | -5° to 90° |
| Night Vision | IR LED, up to 100 m |
| Power Supply | DC 12V or PoE+ (IEEE 802.3at) |
| Power Consumption | 18 W max |
| Operating Temperature | -10°C to +50°C |
| Dimensions (W x H x D) | 180 × 210 × 180 mm |
| Weight | 1.8 kg |
| Ingress Protection | IP66 |
| Memory Card Slot | MicroSD, up to 128 GB |
| Control Interface | RS-232, RS-422, RS-485 |
| Protocol Support | VISCA, Pelco-D, Pelco-P |
| Warranty | 2 years |
Frequently Asked Questions - ALF-30X-SDIC Alfatron
How do I reset the ALF-30X-SDIC camera to factory defaults?
Locate the RESET button on the back panel. Press and hold it for 5 seconds while the camera is powered on. The camera will reboot and restore all factory settings, including network and PTZ parameters.
Can the ALF-30X-SDIC be installed outdoors?
Yes, the camera has an IP66 rating, meaning it is dust-tight and protected against powerful water jets. It is suitable for outdoor use in harsh weather conditions, with an operating temperature range of -10°C to +50°C.
What power supply does the camera need?
The camera can be powered via DC 12V or PoE+ (Power over Ethernet, IEEE 802.3at). The maximum power consumption is 18 W. Use a certified power adapter or a PoE+ switch.
How do I connect the camera to a DVR or NVR?
The camera offers multiple video outputs: 3G-SDI for SDI recorders, HDMI for direct display, and IP streaming for network video recorders. Choose the appropriate output and connect to the corresponding input on your recording device.
How should I clean the camera lens?
Use a soft, dry microfiber cloth to gently wipe the lens surface. For stubborn dirt, slightly dampen the cloth with water or a lens cleaning solution. Avoid using abrasive materials, as they may scratch the lens.
How can I update the camera firmware?
Download the latest firmware from the Alfatron official website. Connect the camera to your computer via Ethernet, access the web interface, and navigate to the 'System' or 'Maintenance' section to upload the firmware file. Do not power off during the update.
Does the ALF-30X-SDIC support audio recording?
Yes, this model includes built-in audio input/output via a terminal block. It supports bidirectional audio, and you can connect an external microphone and speaker. Audio is embedded in the video stream for SDI and IP outputs.
What is the IR night vision distance?
The camera is equipped with an array of infrared LEDs that provide effective night vision up to 100 meters in total darkness. The IR intensity can be adjusted automatically based on the scene.
How do I set a static IP address for the camera?
Access the camera's web interface using its default IP, go to Network Settings, switch from DHCP to Static IP, and enter the desired IP address, subnet mask, and gateway. Save the settings and restart the camera.
What is the warranty on this product?
Alfatron provides a 2-year limited warranty covering defects in materials and workmanship. Please keep your purchase receipt and contact your authorized dealer or Alfatron support for warranty claims.
User questions about ALF-30X-SDIC Alfatron
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual ALF-30X-SDIC - Alfatron and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ALF-30X-SDIC by Alfatron.