LP400 - Access Control System ZKTeco - Free user manual and instructions
Find the device manual for free LP400 ZKTeco in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Access Control System |
| Brand | ZKTeco |
| Model | LP400 |
| Dimensions (H x W x D) | 185 x 80 x 38 mm |
| Weight | 0.35 kg |
| Power Supply | DC 12V, 1.5A |
| Power Consumption | ≤ 5W |
| Authentication Methods | Fingerprint, RFID Card, Password |
| Fingerprint Capacity | 1,000 templates |
| Card Capacity | 1,000 cards |
| Password Capacity | 1,000 passwords |
| Transaction Capacity | 50,000 logs |
| Display | 2.4-inch TFT color screen |
| Communication | TCP/IP, RS485, USB Host |
| Wiegand Support | Input/Output (26/34 bit) |
| Operating Temperature | -10°C to 45°C |
| Operating Humidity | 20% to 80% (non-condensing) |
| IP Rating | IP54 (weather resistant) |
| Installation | Wall-mounted |
| Maintenance | Clean with dry cloth; avoid solvents |
| Security Features | Anti-tamper alarm, duress finger detection |
| Spare Parts | Power adapter, mounting bracket, screws |
| Repairability | Replaceable rear cover and cable |
| General Information | Suitable for small to medium businesses |
Frequently Asked Questions - LP400 ZKTeco
How do I reset the LP400 to factory defaults?
Press and hold the reset button on the back for 10 seconds until the display prompts reset. All data will be erased.
Can I connect the LP400 to a computer?
Yes, via USB or TCP/IP. Use the ZKTeco software for configuration and data transfer.
What types of cards are supported?
The LP400 supports 125kHz EM cards and 13.56MHz Mifare cards (optional).
How do I add a new user?
Go to Menu > User Management > Add User. You can enroll fingerprint, card, or password.
The device is not recognizing my fingerprint. What should I do?
Ensure your finger is clean and placed flat on the sensor. Re-enroll if necessary.
What is the maximum number of users?
The LP400 supports up to 1,000 users with a combination of fingerprint, card, and password.
Can I export attendance logs?
Yes, you can export logs via USB or network to a PC using ZKTeco software.
How do I change the administrator password?
Navigate to Menu > System Settings > Admin Password. Enter current password and set a new one.
Does the LP400 have an alarm function?
Yes, it supports tamper alarm and duress alarm (using a special finger for emergency).
What power adapter should I use?
Use the included DC 12V 1.5A adapter. Using a different adapter may damage the device.
User questions about LP400 ZKTeco
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Control System in PDF format for free! Find your manual LP400 - ZKTeco and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LP400 by ZKTeco.
USER MANUAL LP400 ZKTeco
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ZKTeco
Model : LP400
Category : Access Control System