ProID30 - Access Control System ZKTeco - Free user manual and instructions
Find the device manual for free ProID30 ZKTeco in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Proximity Card Reader / Access Control Keypad |
| Brand | ZKTeco |
| Model | ProID30 |
| Dimensions (H x W x D) | 120 mm x 76 mm x 27 mm |
| Weight | Approx. 150 g |
| Power Supply | 12V DC, 100 mA (typical) |
| Operating Frequency | 125 kHz (EM / HID compatible) |
| Read Range | Up to 10 cm (depending on card type) |
| Output Format | Wiegand 26-bit (or configurable) |
| Keypad | Integrated numeric keypad for PIN entry |
| Indicators | LED (red/green) and buzzer for status |
| Operating Temperature | -10°C to +60°C |
| Ingress Protection | IP65 (weather resistant) |
| Mounting | Wall mount (surface or flush) |
| Compatible Cards | EM 125 kHz, HID 125 kHz, or similar |
| Wiring | 5-wire: power, ground, data0, data1, LED control |
| Certifications | CE, FCC, RoHS |
| Included Accessories | Mounting screws, installation template, manual |
| Cleaning | Use a soft, dry cloth; avoid solvents |
| Maintenance | Inspect wiring periodically; test card read functionality |
| Spare Parts Availability | Contact ZKTeco distributor for replacement units |
Frequently Asked Questions - ProID30 ZKTeco
How do I connect the ProID30 to my access control panel?
Connect the 5 wires: red (12V), black (GND), green (Data0), white (Data1), and blue (LED control). Refer to your panel's wiring diagram.
What is the maximum read range of the ProID30?
The typical read range is up to 10 cm depending on the card type and environmental conditions.
Can the ProID30 be used outdoors?
Yes, it has an IP65 rating, making it weather resistant for outdoor use.
Does the ProID30 support both card and PIN?
Yes, the ProID30 has an integrated numeric keypad for PIN entry and a proximity reader for cards.
What type of cards are compatible?
It works with 125 kHz cards, including EM and HID compatible formats.
How do I change the output format (e.g., 26-bit to 34-bit)?
The output format is typically set via configuration or jumper. Check your panel's requirements. Some models require a configuration card.
The LED is not lighting up. Is it broken?
Check the power supply (12V DC) and wiring. The LED may be controlled by the access panel; ensure the LED wire (blue) is correctly connected.
Can I use the ProID30 with an electric strike?
The ProID30 is a reader/keypad only; it outputs a Wiegand signal. You need an access controller to drive a lock or electric strike.
How do I clean the ProID30?
Wipe the surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.
What is the warranty period?
ZKTeco typically offers a 1-year limited warranty. Contact your dealer for specific terms.
User questions about ProID30 ZKTeco
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Control System in PDF format for free! Find your manual ProID30 - ZKTeco and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ProID30 by ZKTeco.
USER MANUAL ProID30 ZKTeco
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ZKTeco
Model : ProID30
Category : Access Control System