X7 - Access Control System ZKTeco - Free user manual and instructions
Find the device manual for free X7 ZKTeco in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Access Control Terminal |
| Dimensions (WxHxD) | 140 x 60 x 30 mm |
| Weight | 0.3 kg |
| Power Supply | 12V DC, 1A |
| Fingerprint Capacity | 1000 users |
| Log Capacity | 50,000 events |
| Verification Methods | Fingerprint, Keypad, Optional RFID |
| Communication | TCP/IP, RS485, USB Host |
| Display | 2.8-inch TFT Color Screen |
| Voice Guidance | Built-in speaker |
| Operating Temperature | -10°C to 55°C |
| Operating Humidity | 20% to 80% |
| Tamper Alarm | Yes |
| Wiegand Output | 26/34 bit |
| Software Compatibility | ZKTeco Biometric Access Management |
| Cleaning Instructions | Clean sensor with soft, dry cloth |
| Battery Backup | Not included (external UPS optional) |
| Mounting | Wall mount with included screws |
| IP Rating | IP54 |
Frequently Asked Questions - X7 ZKTeco
How do I enroll a new user fingerprint?
Press Menu > User Management > Add User. Select 'Fingerprint' and follow the prompts to scan the finger twice. Ensure the finger is clean and centered on the sensor. The device will confirm enrollment.
What can I do if the fingerprint scanner fails to recognize my finger?
Ensure the finger is clean and dry. Re-enroll the finger from a different angle. If the issue persists, check for sensor damage or update the device firmware via the USB port.
Can I connect the X7 to a PC for management?
Yes. Use the provided USB cable or connect via TCP/IP. Install ZKBioTime or compatible software on your PC. The default IP is 192.168.1.201 (can be changed).
How do I reset the X7 to factory defaults?
Press Menu > System Settings > Factory Reset. Enter the admin password (default: 1234). Confirm the reset. The device will reboot with default settings.
What is the maximum number of users supported?
The X7 supports up to 1000 users with fingerprint templates, and up to 50,000 transaction logs. For larger deployments, consider a higher-end model.
Does the X7 support external door locks?
Yes. The X7 has a relay output (NO/COM) for electric locks. Connect the lock to the relay terminals on the back. Ensure the lock voltage matches the power supply and use a diode for protection.
How do I change the admin password?
Go to Menu > System Settings > Admin Setup > Change Password. Enter the current password, then new password twice. Password must be 4-8 digits.
What should I do if the device does not power on?
Check the power adapter connection. Use a multimeter to verify 12V DC. If power is present, inspect the internal fuse (if accessible) or contact support. Try a different 12V adapter.
Can I use the X7 outdoors?
The X7 has an IP54 rating, meaning it is dust-protected and splash-resistant. For continuous outdoor use, install it under a cover to avoid direct rain and sun exposure.
How to update the firmware?
Download the latest firmware from ZKTeco's website. Copy the .bin file to a USB drive. Insert into the X7's USB port. Go to Menu > System Settings > Firmware Upgrade. Select the file and confirm. Do not power off during update.
User questions about X7 ZKTeco
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Control System in PDF format for free! Find your manual X7 - ZKTeco and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. X7 by ZKTeco.
USER MANUAL X7 ZKTeco
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ZKTeco
Model : X7
Category : Access Control System