DS 1310 T - Pressure washer IPC - Free user manual and instructions
Find the device manual for free DS 1310 T IPC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Pressure Washer |
| Brand | IPC |
| Model | DS 1310 T |
| Power Supply | 230 V / 50 Hz |
| Max Pressure | 130 bar |
| Flow Rate | 10 L/min |
| Motor Type | Electric, Induction |
| Power Rating | 2.3 kW |
| Dimensions (L x W x H) | 400 x 300 x 800 mm |
| Weight | 18 kg |
| Water Connection | Garden hose, 3/4" |
| Hose Length | 10 m |
| Nozzle Type | Adjustable spray nozzle |
| Detergent System | Low-pressure injection |
| Safety Features | Thermal overload protection, pressure relief valve |
| Maintenance | Check oil level, clean filters, inspect hoses |
| Spare Parts Availability | Pump seals, valves, nozzles, hose kits |
| Repairability | Modular design, user-serviceable pump |
| Included Accessories | High-pressure gun, lance, foam nozzle, user manual |
Frequently Asked Questions - DS 1310 T IPC
What type of oil should I use for the pump?
Use a non-detergent SAE 30 or SAE 40 oil. Check the oil level regularly and change it after the first 50 hours of use, then every 500 hours.
How do I connect the pressure washer to a water supply?
Attach a standard garden hose (3/4") to the water inlet. Ensure the water supply is turned on and the hose is not kinked. Never run the pump without water.
Can I use bleach or other chemicals with this pressure washer?
Only use detergents specifically designed for pressure washers. Do not use bleach, chlorine, or acidic cleaners as they may damage the pump and seals.
Why is the pressure washer not starting?
Check the power cord and ensure it is plugged into a functioning outlet. Verify the on/off switch is in the 'ON' position. If it still doesn't start, the thermal overload may have tripped; wait 15 minutes to cool down.
How do I adjust the spray pattern?
Turn the nozzle tip to adjust from a narrow high-pressure jet (0°) to a wide fan spray (40°). For detergent application, use the low-pressure mode by pulling back the nozzle.
What is the maximum water temperature allowed?
Do not use water above 40°C (104°F). Hot water can damage the pump seals and reduce performance.
How often should I clean the inlet filter?
Inspect the inlet filter before each use. Clean it if clogged with debris. A blocked filter can cause low pressure and pump damage.
Can I use an extension cord?
Use a heavy-duty extension cord rated for outdoor use, with a minimum cross-section of 2.5 mm² (AWG 14) and length less than 30 m. Ensure it is fully unwound to prevent overheating.
What should I do if the pressure washer leaks oil?
Check the oil seal and piston packings. If leaking from the drain plug, tighten it. If the pump case is cracked, replace the pump assembly. Contact a service center for repairs.
How do I store the pressure washer for winter?
Drain all water from the pump, hoses, and nozzles. Use a pump antifreeze if necessary. Store in a dry, frost-free area. Disconnect the spark plug if equipped with an engine.
User questions about DS 1310 T IPC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pressure washer in PDF format for free! Find your manual DS 1310 T - IPC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS 1310 T by IPC.
USER MANUAL DS 1310 T IPC
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : IPC
Model : DS 1310 T
Category : Pressure washer