AN5506-04-FS - Router FiberHome - Free user manual and instructions
Find the device manual for free AN5506-04-FS FiberHome in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | FiberHome |
| Model | AN5506-04-FS |
| Product Type | Router / ONT |
| Dimensions (approx.) | 200 mm x 150 mm x 30 mm |
| Weight (approx.) | 350 g |
| Power Supply | 12V DC, 1A |
| Ethernet Ports | 4 x LAN (10/100/1000 Mbps) |
| WAN Port | 1 x GPON (SC/APC) |
| Wi-Fi Standard | 802.11 b/g/n (2.4 GHz) |
| Max Wi-Fi Speed | 300 Mbps (theoretical) |
| Security | WPA/WPA2, WEP, MAC filtering, SPI firewall |
| Main Functions | GPON ONT, routing, Wi-Fi access point, DHCP, NAT, QoS |
| Status Indicators | Power, LOS, PON, LAN, WLAN, Internet |
| Encryption | WPA2-PSK (AES) |
| Port Forwarding | Supported via web interface |
| VPN Passthrough | PPTP, L2TP, IPsec |
| DHCP Server | Built-in |
| Cleaning Instructions | Wipe with a dry, soft cloth; do not use liquids |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -10°C to 70°C |
| Warranty | Standard manufacturer warranty (check local terms) |
| Repairability | Not user-serviceable; contact ISP or manufacturer for service |
Frequently Asked Questions - AN5506-04-FS FiberHome
How do I set up the FiberHome AN5506-04-FS router?
Connect the GPON port to your fiber optic cable via an SC/APC connector. Power on the device and wait for the PON LED to become solid green. Connect a computer to any LAN port using an Ethernet cable. Open a web browser and go to 192.168.1.1 (default IP). Log in with default credentials (usually admin/admin). Follow the setup wizard.
What are the default login credentials?
Default username and password are often admin and admin. If that does not work, try admin / password or check the sticker on the router.
How do I reset the router to factory settings?
Use a paperclip to press and hold the Reset button (usually located on the back panel) for about 10 seconds until all LEDs flash. The router will reboot with factory defaults.
How do I change the Wi-Fi password?
Log into the web interface (192.168.1.1). Go to Wireless settings. Under Security, select WPA2-PSK and enter your new password. Click Save and reboot the router.
What do the LED indicators mean?
Power: solid green if on. LOS: red if fiber link is lost. PON: solid green when registered with ISP. LAN 1-4: solid green if device connected, blinking for activity. WLAN: solid green if Wi-Fi enabled. Internet: solid green if WAN connection is active.
Can I use the router with any ISP?
The AN5506-04-FS is a GPON ONT router, typically used on fiber networks. It may be locked to specific ISPs. Check with your provider for compatibility.
Does it support IPv6?
Yes, the router supports IPv6 through the web interface in WAN settings. Enable IPv6 and configure according to your ISP.
How do I enable port forwarding?
Log into the web interface. Go to Advanced > NAT > Port Forwarding. Add a rule specifying external port, internal port, and local IP. Save and apply.
The Wi-Fi signal is weak. How can I improve it?
Place the router in a central location, away from obstructions and electronic devices. Avoid interference from microwaves or cordless phones. You can also adjust the Wi-Fi channel in the web interface for less congestion.
How do I update the firmware?
Check the manufacturer's website for the latest firmware. Download the file. In the web interface, go to Management > Firmware Upgrade. Upload the file and wait for the router to reboot. Do not power off during the process.
User questions about AN5506-04-FS FiberHome
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual AN5506-04-FS - FiberHome and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AN5506-04-FS by FiberHome.