PT-7710-F-HV - Server Moxa - Free user manual and instructions
Find the device manual for free PT-7710-F-HV Moxa in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed Industrial Ethernet Switch |
| Model | PT-7710-F-HV |
| Brand | Moxa |
| Dimensions (W x D x H) | 440 x 325 x 44 mm (19-inch, 1U) |
| Weight | Approx. 4.5 kg |
| Power Supply | HV: 100-240 VAC, 47-63 Hz |
| Power Consumption | Max. 60 W |
| Number of Ports | 10 ports total: 8 x 10/100/1000BaseT(X) + 2 x 100/1000BaseSFP slots |
| Fiber Ports | 2 SFP slots for 100/1000BaseSFP modules |
| Switching Capability | 20 Gbps |
| MAC Table Size | 8K |
| Supported Protocols | STP, RSTP, MSTP, VLAN, QoS, IGMP Snooping, Link Aggregation |
| Management | Web Console, CLI, SNMP v1/v2c/v3, RMON |
| Operating Temperature | -40 to 75°C |
| Storage Temperature | -40 to 85°C |
| Humidity | 5% to 95% (non-condensing) |
| Certifications | UL 60950-1, CE, FCC |
| Protection Class | IP30 |
| Maintenance | Clean with dry cloth; check ventilation; periodic firmware updates |
| Safety Precautions | Disconnect power before cleaning; use only approved SFP modules; avoid static discharge |
| Spare Parts / Repairability | Field-replaceable power supply and fan modules; SFP modules sold separately |
| General Information | Rack-mountable; fan cooled; LED indicators for status; warranty 5 years |
Frequently Asked Questions - PT-7710-F-HV Moxa
How do I reset the Moxa PT-7710-F-HV to factory defaults?
Press and hold the Reset button on the front panel for at least 5 seconds while the device is powered on. The device will reboot with factory settings.
What is the default IP address for management?
The default IP address is 192.168.127.253 with subnet mask 255.255.255.0. Access via web browser or SSH.
Can I use any SFP module with this switch?
It is recommended to use Moxa-approved SFP modules to ensure compatibility and performance. Third-party modules may not work reliably.
How to configure VLANs?
Log in to the web interface, go to Switching > VLAN. Create VLANs and assign ports with appropriate tagging or untagging.
What power supply does the PT-7710-F-HV require?
It requires an AC power supply of 100-240 VAC, 47-63 Hz. The HV model supports high-voltage input.
How to update firmware?
Download the latest firmware from Moxa's website. Go to Maintenance > Firmware Upgrade in the web interface, select the file, and apply. Do not power off during update.
What is the operating temperature range?
The switch operates reliably in -40 to 75°C (-40 to 167°F), suitable for harsh industrial environments.
How to mount the switch in a rack?
Use the included rack-mount brackets and screws. Attach brackets to the sides, then slide into a 19-inch rack and secure.
Why are the fan lights flashing red?
A flashing red fan LED indicates a fan failure. Check the fan module and replace if necessary. The switch can still operate but may overheat.
Does the switch support SNMP?
Yes, it supports SNMP v1, v2c, and v3. Configure community strings or users under Management > SNMP.
User questions about PT-7710-F-HV Moxa
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual PT-7710-F-HV - Moxa and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PT-7710-F-HV by Moxa.
USER MANUAL PT-7710-F-HV Moxa
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Moxa
Model : PT-7710-F-HV
Category : Server