NPort 6610-8-48V - Server Moxa - Free user manual and instructions
Find the device manual for free NPort 6610-8-48V Moxa in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Serial Device Server |
| Model | NPort 6610-8-48V |
| Brand | Moxa |
| Number of Serial Ports | 8 |
| Power Supply Input | 48 VDC |
| Dimensions (W x D x H) | 440 x 200 x 44 mm (1U rackmount) |
| Weight | 2.0 kg |
| Ethernet Interface | 10/100BaseT(X) (RJ45) |
| Serial Interface | RS-232/422/485 (DB9 or terminal block) |
| Operating Temperature | 0 to 60°C |
| Storage Temperature | -20 to 80°C |
| Relative Humidity | 5 to 95% (non-condensing) |
| Protocol Support | TCP/IP, UDP, HTTP, SNMP, Telnet |
| Configuration Method | Web browser, serial console, Telnet |
| Power Consumption | 12 W max |
| Mounting | Rackmount (1U) |
| Maintenance & Cleaning | Use a dry, soft cloth to clean exterior. Do not use liquids. |
| Safety Precautions | Disconnect power before servicing. Use only specified power adapter. |
| Spare Parts & Repairability | Contact Moxa support for replacement parts and repair services. |
| General Information | Industrial-grade serial server for connecting serial devices to an Ethernet network. |
Frequently Asked Questions - NPort 6610-8-48V Moxa
How do I reset the NPort 6610-8-48V to factory defaults?
Press and hold the Reset button on the front panel for 5 seconds until the LED blinks. The device will reboot with factory settings.
What is the default IP address of the NPort 6610-8-48V?
The default IP address is 192.168.127.254 with subnet mask 255.255.255.0.
Can I use the NPort 6610-8-48V with both RS-232 and RS-422/485 devices?
Yes, each serial port can be independently configured for RS-232, RS-422, or 4-wire RS-485 via DIP switches or software.
How many concurrent TCP connections does the NPort support?
It supports up to 16 concurrent TCP connections per serial port.
Does the NPort 6610-8-48V support PoE?
No, this model does not support Power over Ethernet (PoE). It requires a 48 VDC power supply.
How do I configure the NPort for the first time?
Connect via Ethernet and use the NPort Administration Suite software or web browser to set IP address and serial parameters.
What is the maximum baud rate supported?
The maximum baud rate is 921,600 bps.
Can I mount the NPort 6610-8-48V on a wall?
It is designed for 19-inch rackmount (1U). Alternatively, you can use optional mounting brackets for wall or panel installation.
How do I update the firmware?
Download the latest firmware from Moxa's website, then use the FTP or web interface to upload the file to the device.
What should I do if the NPort is not responding?
Check the power and Ethernet cable connections. Try pinging the IP address. If no response, perform a hardware reset or contact Moxa support.
User questions about NPort 6610-8-48V Moxa
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual NPort 6610-8-48V - Moxa and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. NPort 6610-8-48V by Moxa.
USER MANUAL NPort 6610-8-48V Moxa
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Moxa
Model : NPort 6610-8-48V
Category : Server