NPort 6250-M-SC - Server Moxa - Free user manual and instructions
Find the device manual for free NPort 6250-M-SC Moxa in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Serial Device Server |
| Model | NPort 6250-M-SC |
| Brand | Moxa |
| Serial Ports | 1 x RS-232/422/485 (DB9 male) |
| Ethernet Port | 1 x 10/100BaseT(X) (RJ45) |
| Fiber Port | 1 x 100BaseFX multi-mode (SC connector) |
| Protocols | TCP, UDP, Telnet, HTTP, SNMP, DHCP, ARP |
| Power Input | 12-48 VDC (terminal block) |
| Power Consumption | 2.5 W (typical) |
| Dimensions | 52 x 80 x 117 mm (2.05 x 3.15 x 4.61 in) |
| Weight | 200 g (0.44 lb) |
| Mounting | DIN-rail or wall mount |
| Operating Temperature | -10 to 60°C (14 to 140°F) |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Humidity | 5-95% (non-condensing) |
| Serial Baud Rate | 50 bps to 230.4 kbps |
| Data Bits | 5, 6, 7, 8 |
| Stop Bits | 1, 1.5, 2 |
| Parity | None, Even, Odd, Mark, Space |
| Flow Control | RTS/CTS, XON/XOFF, DTR/DSR |
| Management | Web browser, serial console, Telnet, Windows utility |
| Security | Password protection, IP filtering, SSL/TLS (optional) |
| EMI/EMC | FCC Part 15, CE, EN 55022, EN 55024 |
| Warranty | 5 years |
Frequently Asked Questions - NPort 6250-M-SC Moxa
What is the Moxa NPort 6250-M-SC?
The Moxa NPort 6250-M-SC is a serial device server that connects serial devices (RS-232/422/485) to an Ethernet network, allowing remote access and control.
How do I configure the NPort 6250-M-SC?
Configuration can be done via a web browser, serial console, Telnet, or the NPort Administrator utility. The default IP is 192.168.127.254.
What cables are needed for initial setup?
You need an Ethernet cable to connect to the network and a serial cable (DB9) to connect your serial device. A power supply (12-48 VDC) is also required.
Can I use the NPort 6250-M-SC with RS-422 or RS-485?
Yes, the serial port supports RS-232, RS-422, and RS-485 (2-wire and 4-wire). You must configure the interface type via DIP switches or software.
What is the maximum baud rate supported?
The maximum baud rate is 230.4 kbps. It supports standard baud rates from 50 bps to 230.4 kbps.
Does the device support PoE?
No, the NPort 6250-M-SC does not support Power over Ethernet. It requires an external power source of 12-48 VDC.
How can I reset the device to factory defaults?
Press and hold the Reset button on the front panel for 5 seconds while power is on. The device will reboot with factory defaults.
Can I secure communication over the network?
Yes, the NPort supports password protection, IP filtering, and optionally SSL/TLS encryption for secure data transmission.
What is the operating temperature range?
The device operates in temperatures from -10 to 60°C (14 to 140°F), making it suitable for industrial environments.
Where can I find the user manual and firmware updates?
The user manual is available for download on Moxa's official website. Firmware updates can be obtained from the Moxa support page.
User questions about NPort 6250-M-SC Moxa
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual NPort 6250-M-SC - Moxa and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. NPort 6250-M-SC by Moxa.
USER MANUAL NPort 6250-M-SC Moxa
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Moxa
Model : NPort 6250-M-SC
Category : Server