AEG

FSR83800P - Dishwasher AEG - Free user manual and instructions

Find the device manual for free FSR83800P AEG in PDF.

📄 1 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice AEG FSR83800P - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product typeBuilt-in dishwasher
BrandAEG
ModelFSR83800P
Dimensions (H x W x D)82 cm x 60 cm x 57 cm
WeightApproximately 45 kg
Energy efficiency classA++
Power consumption (annual)270 kWh
Water consumption (annual)2800 L
Noise level44 dB (A)
Number of place settings14
Number of programs8
ProgramsEco, Auto, Intensive, Normal, Quick, Rinse, Glass, Soak
Drying systemAirDry with heat exchanger
Water heating systemFlow-through heater
Safety featuresChild lock, overflow protection, anti-flood system
Self-cleaning filterYes
Adjustable upper basketYes, height-adjustable
Cutlery basket3-piece cutlery basket with removable cover
Interior lightNo
Control panelElectronic with LED display
Delay startUp to 24 hours
Voltage / Frequency220-240 V / 50 Hz
Water connectionCold water only

Frequently Asked Questions - FSR83800P AEG

How do I install the dishwasher?
Installation must be performed by a qualified technician. Ensure the appliance is level and securely connected to water and electricity. Refer to the installation manual for detailed steps.
Why does my dishwasher not start?
Check if the door is properly closed. Ensure the power cord is plugged in and the circuit breaker has not tripped. Also verify that the water supply is turned on.
How to clean the filter?
Remove the lower basket and unscrew the multi-filter system. Rinse under running water and brush away debris. Reassemble and ensure it is locked in place.
What detergent should I use?
Use a quality dishwasher detergent (powder, gel, or tablets). For best results, also add rinse aid and salt for water softener.
How to reset the dishwasher?
Press and hold the Start button for 3 seconds to cancel a cycle. To reset the program, turn the dial to Off, wait 10 seconds, then select a new cycle.
Why are dishes not drying properly?
Ensure you have added rinse aid. Check that the drying option is selected (if available). Also, allow dishes to cool before opening the door.
How to replace the inlet hose?
Turn off the water supply and disconnect the old hose. Connect the new inlet hose (ensuring the gasket is intact) and tighten securely. Check for leaks.
What does the error code E20 mean?
Error code E20 indicates a drainage problem. Check if the drain hose is kinked or blocked. Clean the filter and ensure the pump is not obstructed.
How often should I clean the dishwasher?
Run a maintenance cycle with a dishwasher cleaner every 2-3 months. Also, regularly clean the door seal and spray arms to prevent odors.
Where can I find spare parts?
Spare parts are available from AEG authorized service centers or online retailers. Use the model number FSR83800P when ordering.

User questions about FSR83800P AEG

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Dishwasher in PDF format for free! Find your manual FSR83800P - AEG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FSR83800P by AEG.

USER MANUAL FSR83800P AEG

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : AEG

Model : FSR83800P

Category : Dishwasher