FUS5360CZM - Dishwasher AEG - Free user manual and instructions
Find the device manual for free FUS5360CZM AEG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Freestanding Dishwasher |
| Brand | AEG |
| Model | FUS5360CZM |
| Capacity | 13 Place Settings |
| Energy Efficiency Class | A+ |
| Noise Level | 44 dB |
| Number of Programs | 5 (Eco, Auto, Intensive, Quick, Glass) |
| Water Consumption per Cycle | 9.5 Liters |
| Annual Energy Consumption | 270 kWh |
| Dimensions (Height x Width x Depth) | 850 x 600 x 600 mm |
| Weight | 45 kg |
| Power Supply | 220-240 V, 50 Hz |
| Adjustable Upper Basket | Yes |
| Delay Start | Yes, up to 24 hours |
| Flood Protection | AquaStop System |
| Interior Lighting | LED |
| Cutlery Tray | Yes, removable |
| Salt Indicator | Yes |
| Rinse Aid Indicator | Yes |
| Child Lock | Yes |
Frequently Asked Questions - FUS5360CZM AEG
How do I start the dishwasher if it doesn't respond?
First, ensure the appliance is plugged in and the circuit breaker is on. Check the door latch—the dishwasher will not start unless the door is fully closed. Press the Power button to turn it on, then select a program and press Start.
What should I do if dishes are not drying properly?
Use a rinse aid to improve drying and prevent water spots. Ensure the final rinse temperature is adequate by selecting a program with a hot rinse. Also, clean the filter and check that the spray arms are not blocked.
How do I clean the dishwasher filter?
Turn off the dishwasher and remove the lower basket. Rotate the cylindrical filter counterclockwise and lift it out, along with the flat filter. Rinse both under running water using a soft brush, then reassemble. Perform this monthly to keep the appliance efficient.
Why is there a bad smell coming from the dishwasher?
A foul odor usually indicates food residue accumulated in the filter or tub. Clean the filter, wipe the door gasket, and run a hot wash with a dishwasher cleaner. Leave the door slightly open after cycles to allow ventilation.
Can I use regular table salt in the dishwasher?
No, use only dishwasher salt (coarse salt). Regular table salt contains additives that can damage the water softener. Fill the salt reservoir before a wash cycle, and always check the salt indicator.
How do I cancel or change a running program?
Press and hold the Start/Reset button for about 3 seconds to cancel the current program. The dishwasher will drain and switch off. To change programs, you must first cancel and then select a new one.
What does the 'AquaStop' system do?
AquaStop is a flood protection system. It uses a double-walled hose and a safety valve that shuts off the water supply if a leak is detected. This protects your home from water damage and requires no manual intervention.
How often should I check the rinse aid level?
Check the rinse aid indicator on the control panel. Usually, refill every 2-3 weeks depending on usage. Adjust the dosage setting if you notice spotting or poor drying.
My dishes have white spots after washing. What should I do?
White spots are typically caused by hard water. Refill the salt reservoir and increase the water softener setting. Also, use a rinse aid and check that the detergent dosage matches the water hardness.
What is the recommended maintenance for the dishwasher?
Regularly clean the filters and spray arms, wipe the door seals, and run an empty maintenance cycle with a dishwasher cleaner every few months. Keep the exterior dry and ensure ventilation around the appliance.
User questions about FUS5360CZM AEG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual FUS5360CZM - AEG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FUS5360CZM by AEG.