VIKING

E-40-SS-EWP - Intercom VIKING - Free user manual and instructions

Find the device manual for free E-40-SS-EWP VIKING in PDF.

📄 8 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice VIKING E-40-SS-EWP - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Intercom
Brand Viking
Model E-40-SS-EWP
Material Stainless Steel
Weatherproof Rating Yes (EWP) - Designed for outdoor use
Power Supply 12-24 VAC/VDC
Dimensions (H x W x D) 4.5 inches x 7 inches x 2 inches
Weight 1.5 lbs
Audio Type Hands-free Full Duplex
Call Button Illuminated
Speaker Weather-resistant, 8 ohm
Microphone Electret Condenser
Operating Temperature -30°F to 150°F
Compatibility Standard door strike and call switches
Mounting Type Surface mount
Color Brushed stainless steel
Warranty 2 years
Included Accessories Mounting bracket, screws, connector plug
Adjustable Features Volume, privacy mode
Languages Supported English
Certifications UL, FCC, CSA

Frequently Asked Questions - E-40-SS-EWP VIKING

What is the power requirement for the Viking E-40-SS-EWP intercom?
The E-40-SS-EWP requires a power supply of 12-24 VAC/VDC. Use a Class 2 power source with adequate current rating.
Is the intercom weatherproof for outdoor installation?
Yes, the EWP designation indicates Extra Weather Protection. It is designed for outdoor use and can withstand rain, snow, and extreme temperatures.
How do I wire the Viking E-40-SS-EWP to a door strike?
Connect the door strike to the STRIKE terminals on the back of the unit. Use a common wiring configuration: connect one wire to the COM terminal and the other to the N.O. (normally open) terminal for a fail-safe strike, or N.C. (normally closed) for fail-secure.
Can the intercom be used with a digital or VoIP phone system?
The E-40-SS-EWP is an analog intercom. To integrate with a VoIP system, you will need an analog telephone adapter (ATA) or a Viking VoIP interface.
What is the maximum distance for wiring between the intercom and the power supply?
For reliable operation, the total wire run should not exceed 1,000 feet using 22 AWG wire. For longer distances, use a larger gauge (e.g., 18 AWG) or a local power supply.
How do I adjust the volume on the intercom?
There is a volume pot inside the unit marked VOL. Remove the cover to access it. Turn clockwise to increase volume, counterclockwise to decrease.
Does the unit have a privacy mode?
Yes, the E-40-SS-EWP includes a privacy mode that can be activated via a switch on the circuit board. This prevents the microphone from transmitting when the call button is not pressed.
Is the call button backlit?
Yes, the call button is illuminated with a blue LED ring for easy visibility at night.
Can I mount the intercom on a brick or concrete wall?
Yes, the E-40-SS-EWP comes with a surface-mount back box. Use appropriate masonry anchors (not included) to secure it to brick or concrete.
What is the warranty period for this intercom?
Viking warrants the E-40-SS-EWP for 2 years against defects in materials and workmanship. Contact Viking customer support for warranty claims.

User questions about E-40-SS-EWP VIKING

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Intercom in PDF format for free! Find your manual E-40-SS-EWP - VIKING and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. E-40-SS-EWP by VIKING.

USER MANUAL E-40-SS-EWP VIKING

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : VIKING

Model : E-40-SS-EWP

Category : Intercom