K-1900-8-EWP - Intercom VIKING - Free user manual and instructions
Find the device manual for free K-1900-8-EWP VIKING in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Intercom Station |
| Model | K-1900-8-EWP |
| Brand | Viking |
| Number of Stations | 8 |
| Mounting | Flush or Surface Mount |
| Dimensions (H x W x D) | 8.5 x 5.5 x 2 inches |
| Weight | 1.5 lbs |
| Power Supply | 16-24 VAC/VDC |
| Audio Type | Full-duplex hands-free |
| Call Button | Yes, illuminated |
| Door Release | Built-in relay (dry contacts) |
| Weatherproof Rating | NEMA 4X (indoor/outdoor) |
| Operating Temperature | -40°F to 150°F |
| Material | Stainless steel faceplate, polycarbonate backbox |
| Connections | Screw terminals for power, audio, door strike |
| Compliance | UL, CSA, FCC Part 68 |
| Warranty | 2 years limited |
Frequently Asked Questions - K-1900-8-EWP VIKING
What power supply is required for the Viking K-1900-8-EWP?
The unit operates on 16-24 VAC or VDC. A 16-24 VAC transformer (e.g., Viking V-1A) is recommended for optimal performance.
How do I wire the door strike release?
Connect the door strike to the COM and NO relay terminals (normally open). The relay activates upon pressing the door release button on the intercom.
Is this intercom weatherproof?
Yes, it has a NEMA 4X rating, making it suitable for outdoor installation in rain, snow, and extreme temperatures.
How many call stations does this model support?
The K-1900-8-EWP supports up to 8 individual call stations (door stations). Each station has its own call button and priority.
Can I adjust the volume?
Yes, there is a volume potentiometer accessible inside the unit. Turn clockwise to increase speaker volume or counterclockwise to decrease.
What type of wiring is recommended?
Use 22-18 AWG shielded twisted pair for audio lines to minimize interference. Power wires can be 18-22 AWG, and door strike wiring should match the strike requirements.
How do I reset the intercom to factory defaults?
Press and hold the Master Reset button (located on the main board) for 5 seconds. All settings, including station names and ring tones, will revert to default.
What is the maximum distance between the master and door stations?
The maximum recommended distance is 2000 feet using 22 AWG twisted pair. For longer distances, use a Viking V-AMP4 amplifier to boost the signal.
Can I integrate this intercom with a gate operator?
Yes, the dry contact relay can control a gate operator. Connect the COM and NO terminals to the gate operator's open trigger. Ensure the operator voltage is compatible.
How do I clean the stainless steel faceplate?
Wipe with a soft cloth dampened with mild soap and water. Avoid abrasive cleaners or solvents that may scratch the surface.
User questions about K-1900-8-EWP VIKING
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Intercom in PDF format for free! Find your manual K-1900-8-EWP - VIKING and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. K-1900-8-EWP by VIKING.
USER MANUAL K-1900-8-EWP VIKING
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : VIKING
Model : K-1900-8-EWP
Category : Intercom