VIKING

E-1600-45A-EWP - Intercom VIKING - Free user manual and instructions

Find the device manual for free E-1600-45A-EWP VIKING in PDF.

📄 12 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice VIKING E-1600-45A-EWP - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Weatherproof Intercom
Model E-1600-45A-EWP
Brand Viking
Dimensions (H x W x D) 4.5 x 6.0 x 2.25 inches
Weight 1.6 lbs
Power Supply 12-24 VDC or 12-24 VAC, 200 mA
Audio Type Full-duplex, hands-free
Weatherproof Rating IP66 (dust-tight and protected against powerful water jets)
Operating Temperature -30°F to +140°F (-34°C to +60°C)
Call Button Momentary, illuminated (LED)
Compatibility Viking E-1600 series master stations and most standard analog phone lines
Wiring Screw terminals; 2-6 conductor cables
Mounting Surface mount or flush mount with optional box
Material Heavy-duty aluminum faceplate, powder-coated
ADA Compliant Yes (Americans with Disabilities Act)
Key Functions Call, talk, listen; adjustable volume; privacy mode
Maintenance Clean with damp cloth; no solvents; check seals periodically
Safety Low voltage; UL listed; overcurrent protection
Spare Parts Replacement faceplate, handset (if equipped), screws, gasket
Repairability Modular design; DIY replaceable components; technical support available
General Information Ideal for entry gates, outdoor doors, and industrial areas; 1-year limited warranty

Frequently Asked Questions - E-1600-45A-EWP VIKING

What is the power requirement for the E-1600-45A-EWP?
The intercom operates on 12-24 VDC or 12-24 VAC with a current draw of 200 mA. Use a UL-listed power supply.
Is the E-1600-45A-EWP weatherproof?
Yes, it has an IP66 rating, meaning it is dust-tight and protected against powerful water jets, suitable for outdoor use.
Can I use this intercom with my existing phone system?
It works with Viking E-1600 series master stations and most standard analog phone lines. Check compatibility with your PBX.
How do I adjust the volume on the E-1600-45A-EWP?
Volume is adjusted via a potentiometer inside the unit or through the master station. Refer to the manual for exact location.
What wire gauge should I use for installation?
Use 22-18 AWG twisted pair or 2-6 conductor cable. Keep wire runs under 1000 feet to avoid signal loss.
Does the unit have a call button light?
Yes, the call button is illuminated with an LED for visibility in low light conditions.
How do I clean the intercom?
Clean the faceplate with a soft damp cloth. Do not use abrasive cleaners or solvents. Inspect the gasket regularly.
Is there a warranty for the E-1600-45A-EWP?
Viking offers a 1-year limited warranty against defects in materials and workmanship.
Can I mount the intercom flush into a wall?
Yes, with the optional flush mount box (model V-1000). Surface mount is also possible.
How do I enable privacy mode?
Privacy mode is activated by a DIP switch or via the master station. It prevents the remote unit from listening until the call button is pressed.

User questions about E-1600-45A-EWP VIKING

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Intercom in PDF format for free! Find your manual E-1600-45A-EWP - VIKING and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. E-1600-45A-EWP by VIKING.

USER MANUAL E-1600-45A-EWP VIKING

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : VIKING

Model : E-1600-45A-EWP

Category : Intercom