131 - Pump Zoeller - Free user manual and instructions
Find the device manual for free 131 Zoeller in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Submersible Sump Pump |
| Brand | Zoeller |
| Model | 131 |
| Usage | Clear water and domestic wastewater |
| Housing Material | Gray Cast Iron |
| Motor Type | Single-phase with capacitor |
| Supply Voltage | 115 V / 60 Hz |
| Rated Power | 1/3 HP (≈250 W) |
| Rated Current | 4.5 A |
| Maximum Head | 6.7 m (22 ft) |
| Maximum Flow at 1.5 m | 227 L/min (60 GPM) |
| Discharge Diameter | 38 mm (1 1/2 in) NPT |
| Power Cord | 3 m (10 ft) with US plug |
| Thermal Protection | Built-in (automatic shut-off on overheat) |
| Float Switch | Built-in, automatic adjustment |
| Dimensions (L x W x H) | 28 x 16 x 24 cm (11 x 6.3 x 9.4 in) |
| Net Weight | 6.8 kg (15 lb) |
| Maximum Liquid Temperature | 40 °C (104 °F) |
| Maintenance | Clean the strainer regularly, check the float |
| Safety | Do not run dry, disconnect before maintenance |
| Spare Parts | Available from manufacturer or authorized dealer |
| Repairability | Estimated repairability index 6.5/10 (motor and hydraulic parts accessible) |
Frequently Asked Questions - 131 Zoeller
How to install the Zoeller 131 pump?
Place the pump in the sump on a flat surface. Connect the discharge pipe to the 38 mm outlet. Plug the power cord into a 115 V outlet with GFCI protection. Ensure the float switch can move freely. Refer to the installation diagram in the manual.
What is the maximum head?
The maximum head is 6.7 meters (22 feet). Beyond that, the flow rate decreases significantly.
Can the pump run dry?
No, never run the pump dry. This would damage the mechanical seal and motor. The pump must always be submerged to ensure cooling.
What type of liquid can be pumped?
The Zoeller 131 is designed for clear water and domestic wastewater (gray water) containing no solids larger than 6 mm. Do not use for water laden with sand or aggressive chemicals.
How to maintain my Zoeller 131 pump?
Clean the suction strainer regularly to prevent clogs. Check the proper operation of the float switch. Once a year, inspect the power cord and electrical connections. In case of abnormal noise, consult a professional.
The pump is making a vibration noise, what should I do?
Check that the pump is stable on a flat surface. Ensure the discharge pipe is not blocked or too rigid. If the noise persists, there may be cavitation due to insufficient flow or partial obstruction.
What is the average lifespan of this pump?
With proper maintenance and use under recommended conditions, the Zoeller 131 can last 5 to 10 years. Wear parts like the mechanical seal may need replacement after 3 to 5 years.
Where to find spare parts for the Zoeller 131?
Spare parts (mechanical seal, check valve, float switch, etc.) are available from Zoeller authorized dealers or specialized pump parts websites. Always use genuine parts.
The pump does not start, what to check?
Check the electrical supply: outlet, circuit breaker, GFCI. Ensure the float switch is not stuck in the low position. Make sure the water level is sufficient to activate the float. If the motor is hot, the thermal protection may have tripped: allow it to cool.
What is the warranty for the Zoeller 131?
Zoeller offers a limited warranty of 2 years from the date of purchase. The warranty covers manufacturing defects but not damage due to misuse, corrosion, or normal wear.
User questions about 131 Zoeller
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pump in PDF format for free! Find your manual 131 - Zoeller and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 131 by Zoeller.
USER MANUAL 131 Zoeller
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Zoeller
Model : 131
Category : Pump