N267 - Pump Zoeller - Free user manual and instructions
Find the device manual for free N267 Zoeller in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Submersible pump for clear or dirty water |
| Brand | Zoeller |
| Model | N267 |
| Application | Basement drainage, wastewater lifting, irrigation |
| Power supply | 230 V, 50 Hz, single-phase |
| Motor power | 0.5 HP (approx. 370 W) |
| Maximum flow rate | Approx. 120 L/min |
| Maximum head | 8 m |
| Maximum immersion depth | 10 m |
| Discharge diameter | 1" 1/4 (32 mm) |
| Maximum solid size | Up to 10 mm |
| Housing material | Cast iron or stainless steel |
| Weight | Approx. 9 kg |
| Dimensions (L × W × H) | 20 × 20 × 35 cm |
| Thermal protection | Integrated, automatic shut-off in case of overheating |
| Permanent capacitor | Yes, for reliable start |
| Float switch | Included for automatic on/off |
| Power cable | 10 m, type H07RN-F |
| Liquid temperature | 0 °C to 40 °C |
| Maintenance | Regular cleaning of the strainer and float |
| Spare parts available | Seal kit, impeller, float, capacitor |
| Warranty | 2 years |
Frequently Asked Questions - N267 Zoeller
How to install the Zoeller N267 pump?
Place the pump in the sump on a flat, stable surface. Connect the discharge pipe to the outlet (1" 1/4). Plug the power cord into a 230 V outlet protected by a residual current circuit breaker. Adjust the float height to control the on/off levels.
What type of liquid can the pump handle?
The N267 pump is designed for clear or slightly dirty water (particles up to 10 mm). It should not be used with corrosive, flammable, or high-temperature liquids.
What to do if the pump does not start?
Check the power supply (outlet, circuit breaker). Make sure the float is not stuck. If the motor is hot, wait for it to cool down (thermal protection). Clean the strainer if clogged.
How to maintain the pump regularly?
Disconnect the pump before any intervention. Clean the strainer and impeller with clean water. Check the float operation. Replace worn seals. Store the pump in a frost-free place.
What is the maximum head of the pump?
The maximum head is approximately 8 meters. The flow rate decreases as the head increases.
Can the pump be used without the float?
Yes, the float can be disabled for manual operation, but this exposes the pump to dry running risk. It is recommended to use the float for automatic protection.
What does the indicator or abnormal noise mean?
A hum without rotation often indicates a faulty capacitor or a blocked impeller. A clicking sound may come from debris in the impeller. Disconnect and inspect.
Where to find spare parts for the N267?
Spare parts (seals, impeller, float, capacitor) are available from authorized Zoeller dealers or on specialized spare parts websites. Use the exact model N267 to order.
Can the pump operate continuously?
The N267 pump is designed for intermittent operation (on/off cycles). Prolonged continuous use may lead to overheating. Follow the rest periods indicated in the manual.
What is the warranty of the Zoeller pump?
The pump comes with a 2-year warranty against manufacturing defects. The warranty does not cover damage due to incorrect installation, corrosion, or non-compliant use.
User questions about N267 Zoeller
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pump in PDF format for free! Find your manual N267 - Zoeller and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. N267 by Zoeller.
USER MANUAL N267 Zoeller
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Zoeller
Model : N267
Category : Pump