TL-PI30G - Network card / adapter TP-LINK - Free user manual and instructions
Find the device manual for free TL-PI30G TP-LINK in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Powerline Network Adapter |
| Model Number | TL-PI30G |
| Dimensions (W x D x H) | 100 x 60 x 30 mm |
| Weight | 150 g |
| Power Supply | AC 100-240V, 50/60Hz (direct wall plug) |
| Data Transfer Rate | Up to 1000 Mbps (HomePlug AV2) |
| Ethernet Ports | 1 x 10/100/1000Mbps RJ45 |
| Encryption | 128-bit AES |
| Wireless Frequency | N/A (powerline) |
| LED Indicators | Power, Powerline, Ethernet |
| Operating Temperature | 0°C to 40°C |
| Operating Humidity | 10% to 90% (non-condensing) |
| Compliance | CE, FCC, RoHS |
| Maintenance | Clean with a soft, dry cloth. Do not use liquids. |
| Safety Warnings | Keep away from moisture and heat sources. Unplug during lightning storms. |
| Spare Parts & Repairability | No user-serviceable parts inside. Contact TP-Link support for repairs. |
| General Information | Plug and play installation. Works with all HomePlug AV/AV2 devices. Optimized for gaming and streaming. |
Frequently Asked Questions - TL-PI30G TP-LINK
How do I set up the TP-Link TL-PI30G powerline adapter?
Plug the first adapter into a wall socket near your router and connect it via Ethernet. Plug the second adapter into a socket in the room where you need internet, and connect your device. Press the 'Pair' button on both adapters to secure the connection.
What is the maximum speed of the TL-PI30G?
The TL-PI30G supports data rates up to 1000 Mbps using HomePlug AV2 technology, ideal for HD streaming and online gaming.
Can I use multiple TL-PI30G adapters together?
Yes, you can add more adapters to expand your network. Each adapter must be paired by pressing the 'Pair' button within 2 minutes.
Does the TL-PI30G work with other brands of powerline adapters?
It works with any device that complies with the HomePlug AV or AV2 standard, including adapters from other brands.
How do I reset the TL-PI30G to factory defaults?
Press and hold the 'Reset' button (located on the side) for about 10 seconds until all LEDs flash. Release and the adapter will reboot.
Is the TL-PI30G compatible with my router?
Yes, it connects to any router with an available Ethernet port (RJ45). No special configuration is needed.
What do the LED indicators mean on the TL-PI30G?
Power LED: solid when on. Powerline LED: solid when connected to another adapter; blinks during data transfer. Ethernet LED: solid when a device is connected via Ethernet.
Can I plug the TL-PI30G into a power strip or extension cord?
For best performance, plug the adapter directly into a wall socket. Using extension cords or power strips may reduce signal quality.
How do I secure my powerline network?
Press the 'Pair' button on each adapter to encrypt the connection with 128-bit AES. You can also use the TP-Link Powerline Utility software for advanced settings.
What should I do if my TL-PI30G stops working?
Check the power and Ethernet cables. Try resetting the adapter. If the issue persists, contact TP-Link technical support for assistance.
User questions about TL-PI30G TP-LINK
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network card / adapter in PDF format for free! Find your manual TL-PI30G - TP-LINK and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TL-PI30G by TP-LINK.
USER MANUAL TL-PI30G TP-LINK
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : TP-LINK
Model : TL-PI30G
Category : Network card / adapter