SR500A - Loudspeaker ALTO - Free user manual and instructions
Find the device manual for free SR500A ALTO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Active PA Loudspeaker |
| Model | SR500A |
| Brand | Alto |
| Woofer Size | 15 inches |
| Tweeter Size | 1.4 inches (compression driver) |
| Frequency Response | 50 Hz - 20 kHz |
| Power Rating (RMS) | 500 Watts |
| Peak Power | 1000 Watts |
| Maximum SPL | 126 dB |
| Dimensions (H x W x D) | 27.6 x 17.3 x 15.7 inches |
| Weight | 50 lbs (22.7 kg) |
| Power Supply | 100-240 VAC, 50/60 Hz |
| Input Connectors | 2 x XLR/TRS combo, 1 x RCA |
| Output Connectors | 1 x XLR link output |
| Controls | Volume, EQ (Low, Mid, High), Line/Mic switch |
| Main Functions | Sound reinforcement for live performances, DJ, PA, and installed sound |
| Care and Cleaning | Clean with a soft dry cloth; avoid solvents and liquids |
| Safety | Do not expose to rain or moisture; keep away from heat sources; ensure proper ventilation |
| Spare Parts and Repairability | Contact Alto support or authorized service centers for replacement drivers or amplifier modules |
| General Information | Designed for portable and installed applications; includes pole mount and handles |
Frequently Asked Questions - SR500A ALTO
How do I connect my Alto SR500A to a mixer?
Use a balanced XLR or TRS cable from the mixer output to the Input of the SR500A. Ensure the speaker is powered off during connection.
What is the maximum power handling of the SR500A?
The SR500A has an RMS power rating of 500 Watts and a peak power of 1000 Watts.
Can I use the SR500A as a floor monitor?
Yes, the SR500A can be used as a stage monitor. Place it on its side or use the dedicated monitor angle.
How do I adjust the equalizer on the SR500A?
Use the EQ controls on the rear panel: Low (bass), Mid, and High (treble). Adjust clockwise to increase the frequency band.
What is the frequency response of the SR500A?
The frequency response is 50 Hz - 20 kHz, providing full-range sound reproduction.
How do I clean the Alto SR500A?
Clean the enclosure and grille with a soft dry cloth. Do not use water or cleaning solvents.
Is the SR500A compatible with Bluetooth?
No, the SR500A does not have built-in Bluetooth. Use a wired connection such as XLR, TRS, or RCA.
What is the weight of the SR500A?
The weight is approximately 50 lbs (22.7 kg). Use caution when lifting.
Can I daisy-chain multiple SR500A speakers?
Yes, use the Link output (XLR) to connect to the input of another speaker. Ensure total impedance is not exceeded.
How do I reset the SR500A?
The SR500A has no user reset. If you experience issues, power cycle the speaker by unplugging for 30 seconds.
User questions about SR500A ALTO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual SR500A - ALTO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SR500A by ALTO.
USER MANUAL SR500A ALTO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ALTO
Model : SR500A
Category : Loudspeaker