LX-2 - Uncategorized Radial Engineering - Free user manual and instructions
Find the device manual for free LX-2 Radial Engineering in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 2-Channel Active Direct Box |
| Brand | Radial Engineering |
| Model | LX-2 |
| Inputs | 2 x 1/4" TS (unbalanced) |
| Outputs | 2 x XLR (balanced), 1 x 1/4" Thru |
| Frequency Response | 20 Hz - 20 kHz (±0.5 dB) |
| Dynamic Range | > 110 dB |
| Total Harmonic Distortion | < 0.01% @ 1 kHz |
| Input Impedance | 1 MΩ (unbalanced) |
| Output Impedance | 600 Ω (balanced) |
| Power Supply | Phantom power (48V) or 9V battery |
| Dimensions (W x D x H) | 5.5" x 3.5" x 2.0" (140 x 89 x 51 mm) |
| Weight | 1.2 lbs (0.54 kg) |
| Construction | Steel chassis with baked enamel finish |
| Built-in Features | -15 dB pad, ground lift, high-pass filter |
| Indicators | Power/status LED |
| Included Accessories | Quick start guide, warranty card |
| Warranty | 3 years limited |
| Country of Origin | Canada |
| Application | Studio and stage DI for instruments |
| Cleaning | Wipe with dry cloth; do not use solvents |
| Safety | Use phantom power from mixer only; keep away from moisture |
| Repair | No user-serviceable parts; contact Radial for service |
Frequently Asked Questions - LX-2 Radial Engineering
How do I connect the LX-2 to my mixer?
Connect the instrument to the 1/4" input, then use an XLR cable from the balanced output to the mixer's mic input. Ensure phantom power is on if using the LX-2's active electronics.
What is the ground lift switch for?
The ground lift disconnects the audio ground from the chassis, reducing hum caused by ground loops between the instrument and the mixer.
How do I power the LX-2?
The LX-2 can be powered via 48V phantom power from the mixer or a 9V battery. The battery is automatically engaged when phantom power is absent.
What does the -15 dB pad do?
The pad attenuates the input signal by 15 dB to prevent distortion when using high-output instruments like active basses or keyboards.
Can I use the LX-2 with a passive instrument?
Yes, the LX-2 is an active DI that works well with both passive and active instruments, providing a clean, low-impedance signal.
How do I replace the battery?
Unscrew the bottom plate, replace the 9V battery, and reattach the plate. Use a lithium battery for longer life.
What is the high-pass filter for?
The high-pass filter (HPF) rolls off frequencies below 80 Hz to reduce stage rumble and low-frequency noise.
Is the LX-2 stereo or mono?
The LX-2 is a two-channel unit, capable of handling two independent mono signals or a stereo pair.
What cables come with the LX-2?
The LX-2 does not include cables; you need to provide your own 1/4" and XLR cables.
How do I clean the LX-2?
Wipe the exterior with a soft, dry cloth. Do not use any chemicals or abrasive cleaners.
User questions about LX-2 Radial Engineering
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual LX-2 - Radial Engineering and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LX-2 by Radial Engineering.
USER MANUAL LX-2 Radial Engineering
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Radial Engineering
Model : LX-2
Category : Uncategorized