Workhorse PowerStrip - Uncategorized Radial Engineering - Free user manual and instructions
Find the device manual for free Workhorse PowerStrip Radial Engineering in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Power Distribution / Power Strip |
| Dimensions | 19" x 1.75" x 6.5" (rack ears excluded) |
| Weight | 3.5 lbs (1.6 kg) |
| Power Input | 100-120V or 200-240V AC, 50/60 Hz (selectable) |
| Input Current Rating | 15A max at 120V, 10A max at 240V |
| Outlet Configuration | 8 x Edison (NEMA 5-15R) or IEC C13 (configurable) |
| Surge Protection | 1400 Joules, protected indicator light |
| Ground Lift Switch | Front panel switch to isolate ground on all outlets |
| Front Panel Controls | Master power switch, circuit breaker (push-to-reset), surge indicator |
| Construction | Steel chassis with powder coat finish |
| Mounting | 19" rack mount, 1U height, includes rack ears and screws |
| Cooling | Convection cooled, no internal fans |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Safety Certifications | UL listed, CSA certified, CE compliant |
| Maintenance | Wipe with a dry, non-abrasive cloth; do not use solvents |
| Repairability | User-replaceable fuse; other repairs by Radial authorized service |
| Warranty | 3 years limited against defects in materials and workmanship |
Frequently Asked Questions - Workhorse PowerStrip Radial Engineering
What is the maximum load rating of the Workhorse PowerStrip?
The maximum load is 15A at 120V or 10A at 240V, depending on your input voltage selection. Do not exceed these ratings.
Can I use this power strip in a standard 19-inch rack?
Yes, the Workhorse PowerStrip is designed for standard 19-inch rack mounting and occupies 1U of vertical space. Rack ears and screws are included.
Does the PowerStrip provide surge protection?
Yes, it features 1400 Joule surge protection with a front panel indicator that lights up when protection is active. If the indicator goes dark, surge protection has been compromised.
What is the ground lift switch for?
The ground lift switch isolates the ground (earth) connection on all outlets from the chassis ground. This helps eliminate ground loops and hum in audio systems.
What type of outlets does it have?
The standard model includes 8 Edison (NEMA 5-15R) outlets. Some versions may offer IEC C13 connectors. Check your specific unit.
How do I reset the circuit breaker?
If the unit trips, press the red push-to-reset button on the front panel. First, reduce the load on the outlets to prevent repeated tripping.
Is the PowerStrip compatible with 240V equipment?
Yes, you can set the input voltage selector to 200-240V. However, ensure that all connected equipment is rated for that voltage.
What maintenance does the PowerStrip require?
Regularly inspect the unit for dust and debris. Clean the enclosure with a dry, soft cloth. Do not use liquid cleaners or aerosols. Check the surge indicator periodically.
Can I daisy-chain multiple PowerStrips?
Daisy-chaining is not recommended due to potential overload and fire risk. Each unit should be plugged directly into a properly rated wall outlet.
What is the warranty period and how do I service the unit?
Radial Engineering provides a 3-year limited warranty. For service, contact Radial's authorized service center. The user can replace the fuse (located on the rear panel) if needed.
User questions about Workhorse PowerStrip Radial Engineering
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual Workhorse PowerStrip - Radial Engineering and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Workhorse PowerStrip by Radial Engineering.