SixPack - Uncategorized Radial Engineering - Free user manual and instructions
Find the device manual for free SixPack Radial Engineering in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Passive 6-Channel Direct Box |
| Channels | 6 |
| Input Connectors | 6 x XLR female |
| Output Connectors | 6 x 1/4" TS female |
| Ground Lift | Per channel via front panel switch |
| Attenuation Pad | -15 dB per channel (front panel switch) |
| Frequency Response | 20 Hz - 20 kHz (±0.5 dB) |
| Input Impedance | 10 kΩ (balanced), 4.7 kΩ (unbalanced) |
| Output Impedance | 600 Ω (balanced off), 300 Ω (balanced on) |
| Maximum Input Level | +21 dBu (pad off), +36 dBu (pad on) |
| Power Requirement | None (passive), no phantom power needed |
| Construction | Steel chassis, 19" rackmount 1U |
| Dimensions (W x D x H) | 19 x 6.5 x 1.75 inches (483 x 165 x 44 mm) |
| Weight | 5.2 lb (2.36 kg) |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Intended Use | Balanced to unbalanced signal conversion, hum elimination |
| Cleaning Instructions | Wipe with dry cloth; do not use solvents |
| Safety Warning | Do not expose to moisture or excessive heat |
| Warranty | 3 years limited |
Frequently Asked Questions - SixPack Radial Engineering
How do I connect the SixPack to my mixing console?
Use XLR cables from your microphone or line source to the input of the SixPack. Connect balanced 1/4" TRS cables from the output to your console's line inputs. Ensure ground lift switches are set appropriately.
What is the function of the ground lift switch?
The ground lift disconnects pin 1 of the XLR from chassis ground to eliminate hum caused by ground loops. Start with the switch in the 'lift' position and toggle as needed.
How do I use the -15 dB pad?
The pad attenuates the input signal by 15 dB to accommodate high-level sources. Engage it when the input LED clips or the output distorts.
Does the SixPack require phantom power?
No, it is a passive direct box. Phantom power is neither required nor passed through. The unit operates without any power source.
Can I use the SixPack with unbalanced gear?
Yes, you can connect unbalanced 1/4" TS cables to the outputs. However, for best noise rejection, use balanced TRS cables whenever possible.
What is the maximum input level?
With the pad off, maximum input level is +21 dBu. With pad engaged, it can handle up to +36 dBu.
How do I clean the SixPack?
Use a dry, lint-free cloth. Avoid liquids or abrasive cleaners. Ensure the unit is disconnected from any audio system before cleaning.
Is the SixPack rackmountable?
Yes, it is designed for 19" rack mounting and occupies 1U of space. Rack ears are included.
What is the warranty period?
Radial Engineering offers a 3-year limited warranty from the date of purchase, covering defects in materials and workmanship.
Can I use the SixPack for reamping?
No, the SixPack is designed for signal conversion from balanced to unbalanced. For reamping, you would need a dedicated reamp box like the Radial X-Amp.
User questions about SixPack Radial Engineering
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual SixPack - Radial Engineering and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SixPack by Radial Engineering.
USER MANUAL SixPack Radial Engineering
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Radial Engineering
Model : SixPack
Category : Uncategorized