EKI-8510G-2FI-A - Network switch Advantech - Free user manual and instructions
Find the device manual for free EKI-8510G-2FI-A Advantech in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Industrial Managed Gigabit Ethernet Switch |
| Model Number | EKI-8510G-2FI-A |
| Ports | 8 x 10/100/1000Base-T(X) + 2 x 100/1000Base-SFP |
| Dimensions (W x D x H) | 74 x 106 x 135 mm |
| Weight | 0.85 kg |
| Power Supply | 12~48 VDC (redundant input) |
| Power Consumption | Max 12.5 W |
| Operating Temperature | -40 to 75°C |
| Humidity | 5% to 95% (non-condensing) |
| Protection Rating | IP30 |
| Management | Web, CLI, SNMP v1/v2c/v3, RMON |
| Security Features | 802.1X, ACL, port security, SSH/SSL |
| Redundancy | STP/RSTP/MSTP, ERPS, ring coupling |
| Installation | DIN-rail or panel mount |
| Care Instructions | Wipe with dry cloth; avoid liquids |
| Safety Certifications | CE, FCC, UL 61010 |
| Spare Parts | Power terminal block, DIN-rail kit, SFP modules (sold separately) |
| Repairability | Contact Advantech support or authorized service center |
Frequently Asked Questions - EKI-8510G-2FI-A Advantech
How do I access the web interface of the EKI-8510G-2FI-A?
Connect your PC to any port, set your IP to 192.168.1.x (subnet 255.255.255.0), and open a browser to 192.168.1.10. Default login: admin/admin.
What is the default IP address and login?
Default IP is 192.168.1.10, username admin, password admin.
Can I use SFP modules from other vendors?
The switch supports standard 100/1000Base-SFP modules. For best compatibility, use Advantech or MSA-compliant modules.
How do I reset the switch to factory defaults?
Press and hold the Reset button (located near the power terminal) for 5 seconds while power is on. The switch will reboot with factory settings.
What is the operating temperature range?
The switch is rated for -40 to 75°C, suitable for industrial environments.
Does it support Power over Ethernet (PoE)?
No, the EKI-8510G-2FI-A does not support PoE. Copper ports are data-only.
How do I configure VLANs?
Access the web interface, go to VLAN menu. You can create 802.1Q VLANs and assign ports as access or trunk.
What redundancy protocols are supported?
It supports STP/RSTP/MSTP and ERPS (Ethernet Ring Protection Switching) for network redundancy.
Can I mount it on a DIN rail?
Yes, the switch comes with a DIN-rail bracket. Alternatively, it can be panel-mounted using the included mounting kit.
How do I manage the switch via command line?
Connect via SSH (port 22) or Telnet (port 23) using the default IP. Use the same credentials as the web interface.
User questions about EKI-8510G-2FI-A Advantech
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network switch in PDF format for free! Find your manual EKI-8510G-2FI-A - Advantech and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EKI-8510G-2FI-A by Advantech.
USER MANUAL EKI-8510G-2FI-A Advantech
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Advantech
Model : EKI-8510G-2FI-A
Category : Network switch