EKI-5629CI-PN-AE - Network switch Advantech - Free user manual and instructions
Find the device manual for free EKI-5629CI-PN-AE Advantech in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Industrial Managed Ethernet Switch |
| Model | EKI-5629CI-PN-AE |
| Brand | Advantech |
| Ports | 8 x 10/100/1000Base-T(X) with PoE+ |
| Power Supply | 100-240V AC or 48V DC (dual redundant) |
| Dimensions (W x H x D) | 70 x 125 x 115 mm |
| Weight | 1.3 kg |
| Operating Temperature | -40 to 75°C |
| PoE Budget | 240 W total |
| Management | Web GUI, SNMP v1/v2c/v3, CLI, Telnet |
| Redundant Power Input | Yes (dual inputs) |
| Certifications | CE, FCC, UL 61010-1 |
| Installation | DIN-rail or panel mount |
| Cooling | Fanless, convection cooled |
| Warranty | 3 years |
| VLAN Support | IEEE 802.1Q, up to 4094 VLANs |
| Quality of Service (QoS) | IEEE 802.1p, 8 priority queues |
| Security Features | Port security, ACL, 802.1X, SSH/SSL |
| Maintenance | Clean with dry cloth; no user-serviceable parts inside |
| Spare Parts & Repairability | Contact Advantech support; replace unit if faulty |
Frequently Asked Questions - EKI-5629CI-PN-AE Advantech
How do I assign an IP address to the EKI-5629CI-PN-AE switch?
You can assign an IP via the web interface by connecting to the default IP 192.168.0.1 (subnet mask 255.255.255.0) using a PC with a static IP in the same subnet, or via DHCP if enabled. Refer to the manual for initial setup.
How do I perform a factory reset?
Press and hold the reset button (located on the front panel) for 10 seconds using a paperclip until the system LED flashes. Release the button; the switch will reboot with default settings.
What is the default username and password?
The default credentials are admin for both username and password. It is strongly recommended to change the password after first login.
How do I enable PoE on a specific port?
In the web interface, go to PoE Configuration and enable PoE per port. You can also set priority and power limit. The total PoE budget is 240W.
What should I do if a port does not link?
Check the Ethernet cable and ensure the connected device is powered on. Try a different cable or port. Verify that the port is enabled and not configured as disabled. Check the link LED status.
Can I update the firmware?
Yes. Download the latest firmware from Advantech's support website. Go to System -> Firmware Upgrade in the web GUI, select the file, and upload. Do not power off during update.
How do I mount the switch on a DIN rail?
Using the included DIN-rail bracket, attach it to the rear of the switch. Then clip the assembly onto the DIN rail. Ensure it snaps securely. Alternatively, use the panel-mount brackets for wall mounting.
What is the operating temperature range?
The EKI-5629CI-PN-AE is designed for industrial environments and operates from -40°C to 75°C. It is fanless and convection-cooled.
Does it support VLANs?
Yes, it supports IEEE 802.1Q VLAN with up to 4094 VLAN groups. You can configure port-based or tagged VLANs via the web or CLI.
What power supply should I use?
The switch accepts 100-240V AC via the internal power supply or 48V DC (dual redundant inputs). Use the provided power cord or a certified DC source. Ensure proper grounding.
User questions about EKI-5629CI-PN-AE Advantech
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network switch in PDF format for free! Find your manual EKI-5629CI-PN-AE - Advantech and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EKI-5629CI-PN-AE by Advantech.
USER MANUAL EKI-5629CI-PN-AE Advantech
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Advantech
Model : EKI-5629CI-PN-AE
Category : Network switch