EKI-5626CI-AE - Network switch Advantech - Free user manual and instructions
Find the device manual for free EKI-5626CI-AE Advantech in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Industrial Managed Switch |
| Model | EKI-5626CI-AE |
| Ports | 5 x 10/100Base-T(X) RJ-45 |
| Mounting | DIN-rail, Wall-mount |
| Power Input | 12 - 48 VDC redundant |
| Power Consumption | 4.8 W |
| Operating Temperature | -40 to 75°C |
| Storage Temperature | -40 to 85°C |
| Humidity | 5% to 95% non-condensing |
| Dimensions (W x H x D) | 40 x 100 x 70 mm |
| Weight | 0.2 kg |
| Protection Class | IP30 |
| Management | Layer 2 managed (Web, SNMP, CLI) |
| VLAN Support | IEEE 802.1Q, up to 256 VLANs |
| QoS | IEEE 802.1p |
| Redundant Protocols | STP, RSTP, MSTP |
| Security | 802.1X, ACL, MAC filtering |
| Certifications | CE, FCC, UL, IEC 61850 |
| Warranty | 5 years |
Frequently Asked Questions - EKI-5626CI-AE Advantech
What is the default IP address of the EKI-5626CI-AE?
The default IP address is 192.168.1.1 with subnet mask 255.255.255.0.
How do I reset the switch to factory defaults?
Press and hold the reset button (located on the front panel) for about 10 seconds while the device is powered on. Release the button and the switch will reboot with factory settings.
Can this switch be used outdoors?
Yes, the EKI-5626CI-AE has an operating temperature range of -40 to 75°C and an IP30 rating, but it should be installed in a weatherproof enclosure for direct outdoor exposure.
Does it support Power over Ethernet (PoE)?
No, the EKI-5626CI-AE does not support PoE. It requires external power via a 12-48 VDC source.
What management interfaces are available?
The switch can be managed via web browser (HTTP/HTTPS), SNMP (v1/v2c/v3), and CLI over console port or Telnet/SSH.
How many VLANs can be configured?
Up to 256 VLANs (802.1Q) can be configured.
Is the switch compliant with industrial standards?
Yes, it meets UL 61010, IEC 61850, and NEMA TS2 standards for use in industrial automation and substation applications.
What type of power supply is needed?
A DC power supply providing 12 to 48 VDC (redundant inputs) with a minimum current of 0.5A is required.
How do I update the firmware?
Firmware can be updated via the web interface under System -> Firmware Upgrade. Upload the .bin file and follow the instructions. The device will reboot after successful update.
What types of cables are supported?
Use standard Cat5e or better UTP/STP cables with RJ45 connectors for 10/100Base-T connections.
User questions about EKI-5626CI-AE Advantech
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network switch in PDF format for free! Find your manual EKI-5626CI-AE - Advantech and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EKI-5626CI-AE by Advantech.
USER MANUAL EKI-5626CI-AE Advantech
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Advantech
Model : EKI-5626CI-AE
Category : Network switch