FC-101Net - Processor Kramer - Free user manual and instructions
Find the device manual for free FC-101Net Kramer in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Video Processor |
| Brand | Kramer |
| Model | FC-101Net |
| Category | Processor |
| Dimensions (W x D x H) | 21.5 cm x 16.0 cm x 4.5 cm |
| Weight | 0.8 kg |
| Power Supply | 5V DC, 2A (included adapter) |
| Power Consumption | 6W max |
| Supported Resolutions | Up to 1920x1200 @60Hz, 4K@30Hz |
| Input Connectors | 1x HDMI, 1x VGA, 1x Composite |
| Output Connectors | 1x HDMI, 1x VGA, 1x Ethernet (RJ-45) |
| Control | Ethernet (TCP/IP), RS-232, IR remote |
| Operation Temperature | 0°C to 40°C |
| Housing | Metal enclosure with ventilation slots |
| Package Contents | FC-101Net unit, power adapter, IR remote, user manual |
| Maintenance | Clean with a dry, soft cloth. Do not use liquids. |
| Safety Instructions | Use only included power supply. Do not open the device. Keep away from moisture. |
| Spare Parts | Contact Kramer support for replacement parts. |
| Repairability | No user-serviceable parts. Refer to qualified service personnel. |
| Environmental Compliance | RoHS, WEEE |
| Warranty | 3 years limited warranty |
Frequently Asked Questions - FC-101Net Kramer
How do I connect the FC-101Net to my display?
Connect the HDMI or VGA output of the FC-101Net to your display using a standard cable. Ensure the input source is connected to the corresponding input on the device. Power on all units.
What resolutions does the FC-101Net support?
It supports resolutions up to 1920x1200 at 60Hz and 4K at 30Hz via HDMI. For VGA, maximum resolution is 1920x1200.
How do I reset the FC-101Net to factory defaults?
Use a paperclip to press and hold the Reset button (located on the rear panel) for 5 seconds. The device will reboot with default settings.
How can I update the firmware?
Download the latest firmware from the Kramer website. Connect the device to your PC via USB or Ethernet and use the provided update utility.
What do the LED indicators mean?
The Power LED lights blue when powered on. The Link LED indicates network activity. Flashing means data transfer.
Can I use a different power supply?
No, only use the included 5V DC 2A power adapter to avoid damage. Using a non-compliant supply may void warranty.
How do I clean the FC-101Net?
Unplug the device and wipe the surface with a dry, soft cloth. Do not use any liquids or abrasive cleaners.
Is the FC-101Net HDCP compliant?
Yes, it is HDCP 1.4 compliant on HDMI inputs and outputs, allowing playback of protected content.
My display shows 'No Signal'. What should I do?
Check that all cables are properly connected and the input source is powered on. Verify the display's input is set to the correct port. Try a different cable.
Where can I download the user manual?
The manual is available for free download on the Kramer support page at www.kramerav.com under the FC-101Net product section.
User questions about FC-101Net Kramer
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Processor in PDF format for free! Find your manual FC-101Net - Kramer and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FC-101Net by Kramer.
USER MANUAL FC-101Net Kramer
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Kramer
Model : FC-101Net
Category : Processor