PA-120Net - Receiver Kramer - Free user manual and instructions
Find the device manual for free PA-120Net Kramer in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Power Amplifier / Receiver |
| Brand | Kramer |
| Model | PA-120Net |
| Amplifier Class | Class D |
| Output Power | 2 x 120W RMS at 4Ω |
| Number of Channels | 2 |
| Frequency Response | 20 Hz - 20 kHz (±0.5 dB) |
| Inputs | Balanced Line In, RJ-45 Ethernet |
| Controls | Power switch, Volume knob, Network setup |
| Network Connectivity | Ethernet (TCP/IP, DHCP, HTTP) |
| Mounting | 19-inch rack mount, 1U height |
| Dimensions (W x H x D) | 483 mm x 44 mm x 250 mm (19" x 1U x 9.8") |
| Weight | 3.5 kg (7.7 lbs) |
| Power Supply | 100-240 V AC, 50/60 Hz, auto-switching |
| Cooling | Temperature-controlled internal fan |
| Indicators | Power, signal, clip, network link |
| Protection | Short circuit, thermal overload, DC offset |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Accessories Included | Power cord, rack mount ears, rubber feet |
| Maintenance | Clean the exterior with a dry, soft cloth |
| Safety | Do not expose to rain or moisture; keep ventilation clear |
| Repairability | Contact Kramer certified service centers for repairs |
| Compliance | CE, FCC, RoHS |
Frequently Asked Questions - PA-120Net Kramer
How do I connect the PA-120Net to my network?
Connect an Ethernet cable from your router or switch to the RJ-45 port on the rear panel. The amplifier will obtain an IP address via DHCP automatically. Use the front panel display or the Kramer control software to confirm the assigned IP address.
What is the maximum output power of the PA-120Net?
The PA-120Net delivers 120 watts RMS per channel into a 4 ohm load. When driving 8 ohm speakers, the output is typically around 80 watts RMS per channel.
Can I use the PA-120Net with 8 ohm speakers?
Yes, the PA-120Net is designed to work with 4 ohm and 8 ohm speakers. For 8 ohm loads, the output power is slightly lower, but the amplifier remains stable and efficient.
How do I reset the PA-120Net to factory defaults?
To reset the device, press and hold the reset button on the rear panel (requires a small pin) for about 10 seconds. The amplifier will restart with factory default settings, including network configuration.
What audio inputs does the PA-120Net have?
The amplifier features balanced line inputs on XLR and 1/4-inch TRS connectors. It also has a Euroblock connector for easy installation. Additionally, digital audio can be received via the network connection using Dante or other protocols (depending on firmware).
Does the PA-120Net support Power over Ethernet (PoE)?
No, the PA-120Net does not support PoE. It requires an AC power connection using the included power cord. The Ethernet port is used only for control and monitoring, not for power delivery.
How can I adjust the volume remotely?
The volume can be controlled remotely via the Ethernet interface using the Kramer control protocol or the Kramer RC mobile app. Simply set the front panel volume knob to a fixed level and use the network commands for precise adjustments.
What are the cooling requirements for the PA-120Net?
The PA-120Net uses an internal fan that adjusts its speed based on temperature. Ensure at least one rack unit of free space above and below the unit, and do not block the ventilation slots on the sides and rear. The operating temperature range is 0°C to 40°C.
Can I bridge the PA-120Net channels for more power?
No, the PA-120Net does not support bridged mono mode. It is designed as a stereo amplifier. For higher power requirements, consider using more than one unit or a larger amplifier model.
How do I update the firmware on the PA-120Net?
Firmware updates are performed via the Kramer Firmware Update tool over Ethernet. Download the latest firmware from the Kramer website, connect to the device, and follow the instructions. Ensure the amplifier remains powered during the update.
User questions about PA-120Net Kramer
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual PA-120Net - Kramer and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PA-120Net by Kramer.
USER MANUAL PA-120Net Kramer
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Kramer
Model : PA-120Net
Category : Receiver