SMT-10M-PS-24V-E-2 5-Q-OE - Sensor Festo - Free user manual and instructions
Find the device manual for free SMT-10M-PS-24V-E-2 5-Q-OE Festo in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Proximity Sensor |
| Brand | Festo |
| Model | SMT-10M-PS-24V-E-2.5-Q-OE |
| Operating Voltage | 24 V DC |
| Output Type | PNP (positive switching) |
| Switching Function | Normally open (NO) |
| Connection Type | Connector M8, 3-pin |
| Housing Material | Brass, nickel-plated |
| Protection Class | IP67 |
| Operating Temperature | -25 °C to 70 °C |
| Dimensions (Diameter) | M10 x 1 thread, length 40 mm |
| Sensing Range | 2.5 mm (flush mountable) |
| Weight | Approx. 20 g |
| Mounting | Threaded barrel, flush mountable |
| LED Indicator | Yes, switching state indication |
| Short-Circuit Protection | Yes |
| Reverse Polarity Protection | Yes |
| Overload Protection | Yes |
| Maintenance | No regular maintenance required; keep clean and dry |
| Safety | Complies with applicable safety standards (e.g., EN 60947-5-2) |
| Spare Parts | Not available as separate parts; replace entire unit if defective |
Frequently Asked Questions - SMT-10M-PS-24V-E-2 5-Q-OE Festo
What is the operating voltage of the Festo SMT-10M-PS-24V-E-2.5-Q-OE sensor?
The sensor operates at 24 V DC. Ensure your power supply matches this voltage.
What is the sensing range of this sensor?
The sensing range is 2.5 mm when flush mounted. For non-flush mounting, the range may be slightly reduced.
Is the output PNP or NPN?
The sensor has a PNP (positive switching) output. It switches the load when an object is detected.
How do I connect the sensor to my controller?
Use an M8 3-pin connector. Pin assignments: pin 1 = brown (+24V), pin 3 = blue (0V), pin 4 = black (switched output).
Can the sensor be mounted flush with metal?
Yes, the sensor is designed for flush mounting in metal. Ensure the surrounding material is non-ferrous or follow guidelines for derating.
What is the IP rating of this sensor?
The protection class is IP67, meaning it is dust-tight and protected against temporary immersion in water.
How do I clean the sensor?
Clean the sensor with a soft, dry cloth. Avoid solvents or abrasives. Do not use compressed air near the sensing face.
What should I do if the sensor does not switch?
Check the power supply voltage (24V DC), verify wiring polarity, and ensure the target is within the sensing range. Also check for metal debris or contamination on the sensing face.
Is there a LED indicator on the sensor?
Yes, the sensor has an LED that lights up when the output is active (target detected).
Can I replace the cable or connector?
The sensor has a fixed connector. If damaged, the entire sensor must be replaced. There are no user-serviceable parts.
User questions about SMT-10M-PS-24V-E-2 5-Q-OE Festo
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Sensor in PDF format for free! Find your manual SMT-10M-PS-24V-E-2 5-Q-OE - Festo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SMT-10M-PS-24V-E-2 5-Q-OE by Festo.
USER MANUAL SMT-10M-PS-24V-E-2 5-Q-OE Festo
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Festo
Model : SMT-10M-PS-24V-E-2 5-Q-OE
Category : Sensor