SME-10M - Sensor Festo - Free user manual and instructions
Find the device manual for free SME-10M Festo in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Magnetic Cylinder Sensor |
| Model | SME-10M |
| Brand | Festo |
| Supply Voltage | 10-30 V DC |
| Switching Output | NPN or PNP, Normally Open |
| Max. Load Current | 100 mA |
| Voltage Drop | ≤ 2.5 V |
| Sensing Range | 10 mm |
| Repeatability | ± 0.1 mm |
| Hysteresis | ≤ 0.5 mm |
| Operating Temperature | -25 °C to +70 °C |
| Degree of Protection | IP67 |
| Housing Material | PA66 (Polyamide) |
| Cable Length | 5 m |
| Dimensions (L x W x H) | 25 mm x 8 mm x 10 mm |
| Weight | 10 g |
| Function | Detects piston position in pneumatic cylinders |
| Maintenance | Clean with dry cloth, avoid solvents |
| Safety | Follow EMC guidelines; disconnect power before installation |
| Spare Parts | Contact Festo for replacement cables or brackets |
Frequently Asked Questions - SME-10M Festo
What is the Festo SME-10M sensor used for?
The SME-10M is a magnetic cylinder sensor designed to detect the position of a piston in pneumatic cylinders. It provides a switching signal when the piston magnet passes the sensor.
How do I connect the SME-10M sensor?
The sensor typically has three wires: brown (V+), blue (GND), and black (output). Connect brown to positive supply (10-30 V DC), blue to ground, and black to the input of your controller. Ensure the output type (NPN/PNP) matches your system.
What is the sensing range of the SME-10M?
The sensing range is up to 10 mm, but it depends on the magnetic field strength of the cylinder piston. Typically, a range of 5-10 mm is achievable with standard pneumatic cylinders.
Can the SME-10M be used in harsh environments?
Yes, the sensor has an IP67 protection rating, meaning it is dust-tight and protected against temporary immersion in water. It can operate in temperatures from -25°C to +70°C.
How do I mount the SME-10M on a cylinder?
The sensor is usually mounted using a clamp or bracket that fits the cylinder profile. Align the sensor with the piston magnet path and tighten securely. Refer to the cylinder's groove dimensions.
What is the output type of the SME-10M?
The SME-10M is available in both NPN (sinking) and PNP (sourcing) versions, normally open. Check the part number suffix to confirm your version.
Can I use the SME-10M with a Festo cylinder?
Yes, it is designed for Festo cylinders with T-slot or C-slot profiles. It is compatible with many Festo and other brands' cylinders that have a magnetic piston.
What is the cable length of the SME-10M?
The standard cable length is 5 meters. If a longer cable is needed, use an extension cable with proper shielding.
How do I clean the SME-10M sensor?
Clean the housing with a dry, lint-free cloth. Do not use solvents or abrasive cleaners as they may damage the plastic.
Where can I find spare parts for the SME-10M?
Spare parts such as mounting brackets, cables, or replacement sensors can be ordered from Festo or authorized distributors. Refer to the product manual for part numbers.
User questions about SME-10M Festo
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Sensor in PDF format for free! Find your manual SME-10M - Festo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SME-10M by Festo.
USER MANUAL SME-10M Festo
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Festo
Model : SME-10M
Category : Sensor