SDBC-MSB-1L-NU-K-2-LE - Sensor Festo - Free user manual and instructions
Find the device manual for free SDBC-MSB-1L-NU-K-2-LE Festo in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Cylinder position sensor (magnetic switch) |
| Manufacturer | Festo |
| Model | SDBC-MSB-1L-NU-K-2-LE |
| Sensor category | Magnetic proximity sensor for pneumatic cylinders |
| Sensing principle | Non-contact magnetic field detection |
| Mounting | Slides into a T-slot on the cylinder body |
| Supply voltage | 10 to 30 V DC |
| Switching output | NPN, normally open, 2-wire |
| Rated load current | Max. 200 mA DC |
| Switching frequency | Approx. 1000 Hz |
| Cable length | 1 m (1L) |
| Connector type | M8 plug, 2-pole (K) |
| LED indicator | Integrated status LED (LE) |
| Protection class | IP67 |
| Ambient temperature range | -10 to +60 °C |
| Housing material | Polyamide / brass composite |
| Weight | Approx. 30 g |
| Dimensions (approx.) | 27.5 mm x 4.5 mm x 4.5 mm |
| Cleaning and maintenance | Wipe with a clean, dry, lint-free cloth; do not use solvents |
| Safety notes | Disconnect power before installation or removal |
| Spare parts / reparability | Non-serviceable sealed unit; replace complete sensor if faulty |
Frequently Asked Questions - SDBC-MSB-1L-NU-K-2-LE Festo
What is the Festo SDBC-MSB-1L-NU-K-2-LE sensor used for?
It detects the piston position in pneumatic cylinders using a non-contact magnetic sensor. It is ideal for automation and end-position sensing in Festo cylinders with T-slots.
What is the output type of this sensor?
The output is NPN normally open and it operates as a 2-wire switching device. It switches to ground when the magnetic field is present.
What voltage does this sensor require?
It requires a 10 to 30 V DC supply. It is compatible with standard PLC I/O supplies and industrial control systems.
How do I mount the SDBC-MSB-1L-NU-K-2-LE?
Slide the sensor into the T-slot of a pneumatic cylinder until the desired position, then secure it with the retaining screw. Ensure the active face is aligned with the piston magnet.
What does the LED indicator show?
The integrated LED lights when the sensor detects the piston magnet and the output is active. It helps with setup and diagnostics.
What is the maximum switching current?
The maximum switching current is 200 mA DC. Do not exceed this value to avoid damaging the sensor output stage.
Is this sensor suitable for washdown applications?
It has protection class IP67, so it is dust-tight and protected against temporary immersion in water, suitable for many industrial environments.
How long is the cable and what connector is used?
The sensor comes with a 1 m cable and an M8 connector, making it easy to extend and connect to standard industrial wiring.
Can this sensor be repaired if it fails?
The sensor is a sealed, non-serviceable unit. If it fails, you must replace it as a complete spare part; no internal components are replaceable.
How should I clean the sensor?
Clean the housing with a dry, lint-free cloth. Do not use solvents or compressed air gun on the connector, and always disconnect power before cleaning.
User questions about SDBC-MSB-1L-NU-K-2-LE Festo
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Sensor in PDF format for free! Find your manual SDBC-MSB-1L-NU-K-2-LE - Festo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SDBC-MSB-1L-NU-K-2-LE by Festo.
USER MANUAL SDBC-MSB-1L-NU-K-2-LE Festo
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Festo
Model : SDBC-MSB-1L-NU-K-2-LE
Category : Sensor