SMT-10M-NS-24V-E-0 3-L-M8D - Sensor Festo - Free user manual and instructions
Find the device manual for free SMT-10M-NS-24V-E-0 3-L-M8D Festo in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Magnetic proximity sensor for T-slot cylinders |
| Brand | Festo |
| Model | SMT-10M-NS-24V-E-0 3-L-M8D |
| Supply Voltage | 24 V DC (operating range 10-30 V DC) |
| Output Function | NPN normally open (NO), solid-state switch |
| Electrical Connection | M8 connector, 3-pin |
| Cable Length | 0.3 m (attached cable) |
| Sensing Range | 0.5 to 2 mm (magneto-resistive) |
| Switching Frequency | 1 kHz (typ.) |
| Repeatability | ±0.1 mm |
| LED Status Indicator | Yes, yellow LED for switching state |
| Mounting Type | T-slot mounting, adjustable |
| Housing Material | Aluminium |
| Protection Class | IP67 |
| Ambient Temperature | -20 °C to +60 °C |
| Short-Circuit Protection | Yes, automatic reset |
| Reverse Polarity Protection | Yes |
| Dimensions (W x H x L) | 8.7 mm x 28.5 mm x 32.5 mm |
| Weight | 30 g (approx.) |
| General Function | Contactless position detection for pneumatic actuators |
Frequently Asked Questions - SMT-10M-NS-24V-E-0 3-L-M8D Festo
What is the operating voltage range of the Festo SMT-10M-NS-24V-E-0 3-L-M8D?
The sensor operates with a supply voltage of 24 V DC, but the working range is from 10 to 30 V DC, making it compatible with standard industrial power supplies.
What type of output does this sensor provide?
It features a NPN solid-state output that is normally open (NO). It acts as a switch that closes when the target (magnet) is detected.
How should I wire the M8 connector?
The M8 3-pin connector typically uses: Pin 1 = brown wire (positive supply), Pin 3 = blue wire (negative supply), Pin 4 = black wire (switched output). Always verify the pinout in the manual.
Can this sensor be used with any T-slot cylinder?
Yes, the sensor is designed for T-slot mounting and fits most cylinder grooves that comply with common standards. The adjusting screw allows precise positioning within the slot.
What is the sensing range of this sensor?
The sensing range is typically 0.5 to 2 mm from the magnetic field source, ideal for position detection of a cylinder piston equipped with a magnet.
Does the sensor have built-in protection?
Yes, it includes short-circuit protection with automatic reset and reverse polarity protection to prevent damage from incorrect wiring.
What is the operating temperature range?
The ambient temperature range is -20 °C to +60 °C, suitable for most industrial environments.
How do I install the sensor in the T-slot?
Slide the sensor into the T-slot from one end, tighten the mounting screw to secure it, and then adjust the position so the LED reacts to the piston movement.
What does the yellow LED indicator mean?
The yellow LED lights up when the sensor's output is active, i.e., when it detects the magnet. This helps during commissioning and troubleshooting.
How should I clean and maintain the sensor?
Clean the sensor with a soft, dry cloth to remove dust and contaminants. Do not use harsh chemicals or solvents, and regularly check the cable and connector for damage.
User questions about SMT-10M-NS-24V-E-0 3-L-M8D Festo
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Sensor in PDF format for free! Find your manual SMT-10M-NS-24V-E-0 3-L-M8D - Festo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SMT-10M-NS-24V-E-0 3-L-M8D by Festo.
USER MANUAL SMT-10M-NS-24V-E-0 3-L-M8D Festo
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Festo
Model : SMT-10M-NS-24V-E-0 3-L-M8D
Category : Sensor