DGSL-8-50-EA - Industrial Automation Festo - Free user manual and instructions
Find the device manual for free DGSL-8-50-EA Festo in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Pneumatic Guided Actuator |
| Model | DGSL-8-50-EA |
| Brand | Festo |
| Stroke | 50 mm |
| Size (Guide Width) | 8 mm |
| Operating Pressure | 2 to 8 bar |
| Ambient Temperature | -20 to 80 °C |
| Weight | 0.5 kg |
| Materials | Aluminum body, hardened steel guide |
| Pneumatic Connection | G1/8 |
| Maximum Force at 6 bar | Approx. 200 N |
| Cushioning Type | Elastic damping rings at both ends |
| Operating Medium | Compressed air, filtered and lubricated |
| Repeat Accuracy | ±0.01 mm |
| Maximum Travel Speed | 0.8 m/s |
| Degree of Protection | IP40 |
| Maintenance | Lubricate guide and seals every 10 million cycles |
| Safety Precautions | Do not exceed max pressure; ensure proper mounting |
| Spare Parts | Seal kit, cushioning ring kit |
| Repairability | Replaceable seals and guide elements |
| Mounting Position | Any position |
| Energy Supply | Pneumatic, 2 to 8 bar |
| General Information | Part of the DGSL series with integrated linear guide |
Frequently Asked Questions - DGSL-8-50-EA Festo
What is the maximum operating pressure for the DGSL-8-50-EA?
The maximum operating pressure is 8 bar. Ensure the pressure does not exceed this value to avoid damage.
What is the stroke length of this actuator?
The stroke length is 50 mm, as indicated by the model number.
How do I install the DGSL-8-50-EA?
Mount the actuator using the threaded holes on the body. Secure it firmly and connect the pneumatic ports to G1/8 fittings. Refer to the manual for detailed mounting instructions.
What type of cushioning does the DGSL-8-50-EA have?
It features elastic damping rings at both ends to absorb impact and reduce noise.
How often should the actuator be lubricated?
Lubrication is recommended every 10 million cycles or when necessary using a suitable grease. See the manual for recommended lubricants.
Can the DGSL-8-50-EA be used in a vertical position?
Yes, the actuator can be mounted in any position. However, vertical mounting may require additional guidance or counterbalance depending on the load.
What is the maximum load the actuator can handle?
The maximum force at 6 bar is approximately 200 N. Actual load capacity depends on speed, mounting orientation, and duty cycle.
What spare parts are available for the DGSL-8-50-EA?
Common spare parts include seal kits and cushioning ring kits. These are available from Festo or authorized distributors.
How do I adjust the cushioning on the actuator?
The cushioning is not adjustable; it uses fixed elastic rings. If cushioning performance degrades, replace the rings.
What is the ambient temperature range for operation?
The actuator can operate in temperatures from -20 to 80 °C. Avoid exposure to extreme temperatures outside this range.
User questions about DGSL-8-50-EA Festo
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Industrial Automation in PDF format for free! Find your manual DGSL-8-50-EA - Festo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DGSL-8-50-EA by Festo.
USER MANUAL DGSL-8-50-EA Festo
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Festo
Model : DGSL-8-50-EA
Category : Industrial Automation