EMME-AS-100-MK-HS-AMXB - Industrial Automation Festo - Free user manual and instructions
Find the device manual for free EMME-AS-100-MK-HS-AMXB Festo in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Servo Motor |
| Model | EMME-AS-100-MK-HS-AMXB |
| Brand | Festo |
| Category | Industrial Automation |
| Rated Voltage | 400 V AC |
| Rated Current | 10 A |
| Rated Torque | 4 Nm |
| Rated Speed | 3000 rpm |
| Protection Class | IP65 |
| Motor Type | Synchronous servo motor |
| Feedback | Absolute encoder |
| Connection Type | M23 connector |
| Shaft Type | Keyed shaft |
| Cooling | Natural convection |
| Ambient Temperature | 0 °C to 40 °C |
| Storage Temperature | -20 °C to 80 °C |
| Weight | 8 kg |
| Dimensions (approx.) | 200 x 150 x 250 mm |
| Maintenance | Lubrication-free; periodic inspection of connectors |
| Safety Feature | Integrated holding brake option |
Frequently Asked Questions - EMME-AS-100-MK-HS-AMXB Festo
How do I install the Festo EMME-AS-100-MK-HS-AMXB servo motor?
Mount the motor using the provided keyed shaft and ensure proper alignment. Connect the power and feedback cables via the M23 connector. Refer to the installation manual for torque specifications.
What cables are required for this motor?
Use a shielded power cable (4-wire, 400 V AC) and a feedback cable (8-wire, absolute encoder). Festo recommends cables with M23 connectors for both.
How do I configure the motor parameters?
Configuration is done via a Festo servo drive controller (e.g., CMMP-AS). Use the Festo Configuration Tool (FCT) software to set torque, speed, and encoder parameters.
What do the error codes mean?
Error codes are displayed on the connected drive. Common codes: E01 (overcurrent), E02 (overtemperature), E03 (encoder fault). Refer to the drive manual for full list.
What maintenance is required?
The motor is maintenance-free regarding lubrication. Periodically inspect connectors for damage and clean the housing with a dry cloth. Check for abnormal noise or vibration.
Which controllers are compatible with this motor?
Compatible with Festo servo drives series CMMP-AS and CMMS-ST. Ensure the drive supports absolute encoder feedback.
How do I set the torque limit?
Set the torque limit in the drive parameters via FCT software. The motor can deliver up to 4 Nm continuously; peak torque is higher for short durations.
Can I order replacement parts?
Yes, contact Festo customer service or visit the Festo online shop. Common replacements include connector kits and encoder cables. Use original parts.
Where can I download the manual?
The manual is available for free download on notice-facile.com and the Festo website. Search for model EMME-AS-100-MK-HS-AMXB.
What warranty applies?
Festo offers a 2-year warranty from date of purchase, covering manufacturing defects. Extended warranty options are available for an additional cost.
User questions about EMME-AS-100-MK-HS-AMXB Festo
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Industrial Automation in PDF format for free! Find your manual EMME-AS-100-MK-HS-AMXB - Festo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EMME-AS-100-MK-HS-AMXB by Festo.
USER MANUAL EMME-AS-100-MK-HS-AMXB Festo
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Festo
Model : EMME-AS-100-MK-HS-AMXB
Category : Industrial Automation