PDU20SWHVCEE10ATNET - Power Strip CyberPower - Free user manual and instructions
Find the device manual for free PDU20SWHVCEE10ATNET CyberPower in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Switched Power Distribution Unit (PDU) |
| Model | PDU20SWHVCEE10ATNET |
| Brand | CyberPower |
| Dimensions (H x W x D) | 44.5 x 17.5 x 4.4 cm (17.5 x 6.9 x 1.7 in) |
| Weight | 2.3 kg (5.1 lbs) |
| Input Voltage | 200-240 V AC |
| Input Frequency | 50/60 Hz |
| Maximum Current | 16 A |
| Maximum Power | 3680 VA / 3680 W |
| Output Outlets | 10 x CEE 7/7 Schuko sockets |
| Input Plug | IEC 60320 C20 |
| Switching Type | Individual outlet control via network |
| Remote Management | Ethernet, SNMP, web interface, SSH, Telnet |
| Local Monitoring | LCD display for current, power, and status |
| Overload Protection | 15 A circuit breaker |
| Surge Protection | Yes, integrated |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Housing Material | Metal |
| Mounting | 19-inch rackmount, 0U vertical |
| Certifications | CE, RoHS |
| Warranty | 3 years |
Frequently Asked Questions - PDU20SWHVCEE10ATNET CyberPower
How do I reset the PDU to factory defaults?
Press and hold the reset button on the front panel for 10 seconds using a paperclip. The device will reboot with factory settings.
What is the maximum load per outlet?
Each CEE 7/7 outlet can handle up to 10 A continuously. The total load across all outlets must not exceed 16 A.
Can I monitor power consumption remotely?
Yes, via the built-in web interface or SNMP. The LCD also shows real-time current and power.
How do I set up email alerts?
Log into the web interface, go to Event Configuration, enter SMTP server details and recipient addresses, then enable alerts for overload, power loss, etc.
Does the PDU support outlet power sequencing?
Yes, you can configure power-on and power-off delays per outlet to avoid inrush current.
What type of input plug is required?
The PDU uses an IEC 60320 C20 inlet, which requires a C19 power cord (not included).
Is the PDU compatible with third-party UPS systems?
Yes, it can be connected to any UPS with a C19 output. The PDU's surge protection adds an extra layer.
How do I update the firmware?
Download the latest firmware from CyberPower's website, then upload via the web interface under 'Administration > Firmware Update'.
What do the LED indicators mean?
Green LED: normal operation. Red LED: overload or fault. Flashing: network activity. Refer to the manual for detailed status codes.
Can I mount the PDU horizontally?
This model is designed for vertical 0U mounting in a 19-inch rack. Horizontal mounting is not recommended due to ventilation.
User questions about PDU20SWHVCEE10ATNET CyberPower
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Power Strip in PDF format for free! Find your manual PDU20SWHVCEE10ATNET - CyberPower and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PDU20SWHVCEE10ATNET by CyberPower.
USER MANUAL PDU20SWHVCEE10ATNET CyberPower
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : CyberPower
Model : PDU20SWHVCEE10ATNET
Category : Power Strip