PDU15SW8RNET - Power Strip CyberPower - Free user manual and instructions
Find the device manual for free PDU15SW8RNET CyberPower in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Switched PDU with Network Management |
| Model | PDU15SW8RNET |
| Brand | CyberPower |
| Input Voltage | 120V |
| Input Current Rating | 15A |
| Input Plug | NEMA 5-15P |
| Output Receptacles | 8 x NEMA 5-15R (switched) |
| Output Current Rating | 15A total |
| Form Factor | 1U Rackmount |
| Dimensions (W x D x H) | 17.2 x 5.9 x 1.75 in (437 x 150 x 44 mm) |
| Weight | 7.2 lbs (3.3 kg) |
| Network Management | Built-in web interface, SNMP, Telnet, SSH |
| Remote Control | Individual outlet switching via web browser |
| Energy Metering | Real-time power consumption per outlet |
| Overload Protection | 15A circuit breaker |
| Surge Protection | 1080 Joules |
| LED Indicators | Power, network, overload per outlet |
| Operating Temperature | 32°F to 113°F (0°C to 45°C) |
| Safety Certifications | UL, cUL, FCC |
| Package Contents | PDU, power cord, mounting brackets, user manual |
| Cleaning Instructions | Wipe with a dry, lint-free cloth; do not use liquids |
| Spare Parts / Repairability | Power cord replacement; no user-serviceable internal parts |
Frequently Asked Questions - PDU15SW8RNET CyberPower
How do I connect the PDU15SW8RNET to my network?
Connect an Ethernet cable from your router or switch to the RJ45 port on the PDU. Use the default IP address (192.168.0.100) to access the web interface. Change the IP settings as needed via the front panel LCD or DHCP.
What is the maximum current draw for each outlet?
Each outlet is rated for 15A maximum, but the total current draw for all outlets combined must not exceed 15A. Use the energy metering feature to monitor load.
Can I schedule power on/off times for individual outlets?
Yes, the PDU supports scheduling via the web interface. You can set daily or weekly timers for each outlet to automate power cycling.
How do I reset the PDU to factory defaults?
Press and hold the reset button (located near the Ethernet port) for 10 seconds using a paperclip. This will restore all settings to factory defaults.
What does the LED on each outlet indicate?
Each outlet has a green LED that lights up when the outlet is powered on. If the LED is off, the outlet is switched off. A red LED indicates an overload or fault condition.
Can I monitor power usage remotely?
Yes, the PDU provides real-time power consumption data per outlet and total. Access via web interface, SNMP, or compatible software such as CyberPower PowerPanel.
What type of power cord does the PDU use?
It uses a standard NEMA 5-15P to C13 power cord. The PDU comes with a 6-foot (1.8 m) cord.
Is the PDU compatible with 3rd-party network management systems?
Yes, it supports SNMP v1/v2c/v3, allowing integration with systems like PRTG, Nagios, or SolarWinds. Also supports SMTP for email alerts.
How do I update the firmware?
From the web interface, go to Maintenance > Firmware Update. Download the latest firmware from CyberPower's website and upload the file. Do not power off during update.
What should I do if the PDU does not power on?
Check that the input power cord is securely connected and the circuit breaker on the PDU is not tripped. If the breaker is tripped, reduce the load and reset it. If the PDU still does not power on, contact CyberPower support.
User questions about PDU15SW8RNET CyberPower
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Power Strip in PDF format for free! Find your manual PDU15SW8RNET - CyberPower and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PDU15SW8RNET by CyberPower.
USER MANUAL PDU15SW8RNET CyberPower
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : CyberPower
Model : PDU15SW8RNET
Category : Power Strip