Switched PDU41104 - Power Strip CyberPower - Free user manual and instructions
Find the device manual for free Switched PDU41104 CyberPower in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Switched PDU (Power Distribution Unit) |
| Number of Outlets | 4 NEMA 5-15R |
| Input Plug | NEMA 5-15P |
| Rated Voltage | 100–240 V AC |
| Maximum Current | 15 A |
| Power Rating | 1200 VA (120 V) / 2400 VA (240 V) |
| Input Frequency | 50/60 Hz |
| Management Interface | Ethernet (RJ45), SNMP, HTTP, SSH, Telnet |
| Remote Control | Individual outlet switching via web UI or SNMP |
| Power Monitoring | Per-outlet current, voltage, power, energy consumption |
| Rack Mountable | Yes, 1U (horizontal mount) |
| Dimensions (W x H x D) | 17.2 x 1.75 x 6.5 in (437 x 44 x 165 mm) |
| Weight | 3.2 lb (1.45 kg) |
| Overload Protection | 15 A resettable circuit breaker |
| Operating Temperature | 32°F to 122°F (0°C to 50°C) |
| Compliance Certifications | UL 60950-1, FCC Part 15 |
| Warranty | 3 years limited |
Frequently Asked Questions - Switched PDU41104 CyberPower
How do I assign an IP address to the Switched PDU41104?
By default, the PDU obtains an IP via DHCP. If DHCP is unavailable, it falls back to 192.168.1.100. You can also set a static IP using the LCD front panel or via the serial console.
Can I control individual outlets remotely?
Yes. Each outlet can be switched on/off/reboot independently through the web interface, SNMP, or command-line interface (SSH/Telnet).
Does the PDU support power monitoring?
Yes, it provides real-time monitoring of voltage, current, power, and energy consumption for each outlet and the total across all outlets.
What is the maximum load for the PDU?
The maximum current is 15 A total. At 120 V, this corresponds to 1200 VA (1800 W at unity power factor). Do not exceed the rated load.
How do I reset the PDU to factory defaults?
Press and hold the Reset button on the front panel for 10 seconds. The IP address will revert to DHCP (or 192.168.1.100) and all settings will be cleared.
Is the PDU compatible with 200–240 V systems?
Yes, it automatically adjusts to line voltages from 100–240 V AC. At 240 V, the rated current is still 15 A, providing 2400 VA.
Can I update the firmware?
Yes. Download the latest firmware from the CyberPower support website and upload it via the web interface under Administration > Firmware Upgrade.
What SNMP versions are supported?
The PDU supports SNMPv1, SNMPv2c, and SNMPv3 for secure management.
Does the PDU have a power cord?
Yes, a 6 ft (1.8 m) detachable power cord with NEMA 5-15P plug is included. Replacement cords can be ordered separately.
What is the operating temperature range?
The device operates reliably between 32°F and 122°F (0°C to 50°C) and up to 95% humidity (non-condensing).
User questions about Switched PDU41104 CyberPower
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Power Strip in PDF format for free! Find your manual Switched PDU41104 - CyberPower and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Switched PDU41104 by CyberPower.
USER MANUAL Switched PDU41104 CyberPower
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : CyberPower
Model : Switched PDU41104
Category : Power Strip