AXLOC-HN3 - Uncategorized AXESS - Free user manual and instructions
Find the device manual for free AXLOC-HN3 AXESS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Line Output Converter |
| Brand | AXESS |
| Model | AXLOC-HN3 |
| Dimensions (approx.) | 3.5 x 2.5 x 1 in (89 x 64 x 25 mm) |
| Weight | 0.2 lb (90 g) |
| Input Voltage | 12V DC (negative ground) |
| Input Type | Speaker-level (high-level) |
| Output Type | RCA (low-level) |
| Adjustable Input Sensitivity | Yes (via potentiometer) |
| Ground Loop Isolation | Built-in isolation transformer |
| Remote Turn-On | Signal-sensing (auto turn-on) |
| Frequency Response | 20 Hz – 20 kHz (±1 dB) |
| Maximum Input Power | 50W per channel |
| Output Impedance | 100 kΩ |
| Construction | Compact aluminum chassis |
| Maintenance | Clean with dry, soft cloth; avoid liquids |
| Safety Warnings | Disconnect battery negative terminal before installation; secure wiring to prevent shorts |
| Spare Parts Availability | Not available individually; contact AXESS support |
| General Information | Designed for car audio systems to add amplifiers to factory radios |
Frequently Asked Questions - AXLOC-HN3 AXESS
What is the AXESS AXLOC-HN3 used for?
The AXLOC-HN3 is a line output converter (LOC) that allows you to connect an aftermarket amplifier to a factory car stereo by converting speaker-level signals to RCA preamp outputs.
How do I install the AXLOC-HN3?
First, disconnect the car battery. Connect the speaker wires from your factory radio to the input terminals of the LOC. Then, connect RCA cables from the LOC output to your amplifier. Finally, connect the LOC's ground wire to a clean chassis ground. Ensure all connections are secure before reconnecting the battery.
Does the AXLOC-HN3 require a remote turn-on wire?
No, the AXLOC-HN3 features signal-sensing auto turn-on, so it activates automatically when it detects audio input from the speaker wires.
What is the maximum input power the AXLOC-HN3 can handle?
The converter can handle up to 50W per channel from the factory radio, which is sufficient for most OEM head units.
Will the AXLOC-HN3 work with a Bose or premium factory system?
Yes, it works with most factory systems, including Bose, as long as the speaker-level output is within the LOC's input limit. However, some amplified factory systems may require additional attenuation.
How do I adjust the input sensitivity on the AXLOC-HN3?
Use a small flathead screwdriver to turn the gain adjustment potentiometer located on the side of the unit. Start with the gain at minimum and gradually increase until you achieve the desired output without distortion.
Can I connect the AXLOC-HN3 to a stock radio with only two speaker channels?
Yes, the LOC can be used with 2-channel systems. Just connect the two input channels and use the RCA outputs for a 2-channel amplifier.
What type of ground connection should I use?
The ground wire should be connected to a clean, bare metal chassis point using a ring terminal and screw. Avoid existing ground points used by other devices to prevent noise.
Is the AXLOC-HN3 compatible with high-level inputs from a subwoofer output?
Yes, it can accept the subwoofer speaker-level output from a factory radio, but ensure the signal is not already low-pass filtered if you need full-range output.
What should I do if I hear engine whine after installation?
Engine whine is often due to a ground loop. Check all ground connections and ensure the LOC and amplifier are grounded at the same point. If the issue persists, consider using a ground loop isolator on the RCA cables.
User questions about AXLOC-HN3 AXESS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual AXLOC-HN3 - AXESS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AXLOC-HN3 by AXESS.
USER MANUAL AXLOC-HN3 AXESS
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AXESS
Model : AXLOC-HN3
Category : Uncategorized