AXAMP-FD1 - Uncategorized AXESS - Free user manual and instructions
Find the device manual for free AXAMP-FD1 AXESS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Amplifier |
| Model | AXAMP-FD1 |
| Brand | AXESS |
| Dimensions (approx.) | 10 x 10 x 5 cm |
| Weight (approx.) | 0.5 kg |
| Power Supply | 12V DC 2A or 110-240V AC adapter (included) |
| Output Power | 2 x 50W RMS (4Ω) |
| Inputs | RCA stereo, Bluetooth (optional) |
| Outputs | Speaker terminals (2 channels), 3.5mm headphone |
| Frequency Response | 20 Hz - 20 kHz |
| Total Harmonic Distortion | < 0.1% |
| Signal-to-Noise Ratio | ≥ 90 dB |
| Controls | Volume, bass, treble, power switch |
| Protection Features | Short circuit, overload, thermal protection |
| Cooling | Passive (no fan) |
| Chassis Material | Aluminum alloy |
| Mounting | Desktop or optional rack mount |
| Operating Temperature | 0°C to 40°C |
| Cleaning Instructions | Wipe with dry cloth; avoid liquids |
| Repairability | Contact authorized service center for repairs |
Frequently Asked Questions - AXAMP-FD1 AXESS
What speakers can I connect to the AXAMP-FD1?
You can connect any passive speakers with an impedance of 4-8 ohms. Use speaker wire to connect to the binding post terminals.
How do I pair Bluetooth?
If your model includes Bluetooth, press the Bluetooth button or switch the input to Bluetooth. Search for 'AXAMP-FD1' on your device and connect.
What power supply does the amplifier need?
The amplifier requires a 12V DC power supply with at least 2A current. An AC adapter is included for wall outlet use.
No sound from the speakers. What should I check?
First, ensure the amplifier is powered on and volume is not at minimum. Check that input cables are securely connected and the correct input is selected. Also verify speaker wires are properly connected to the terminals.
Can I use the amplifier with a car battery?
Yes, the amplifier can run on a 12V car battery. Ensure the battery provides sufficient current (≥2A). Use a fused connection.
How do I clean the amplifier?
Disconnect power and wipe the exterior with a soft, dry cloth. Do not use any liquids or abrasive cleaners.
What is the maximum power output?
The AXAMP-FD1 delivers up to 2x50W RMS into 4-ohm speakers. Actual output depends on power supply and speaker impedance.
Does the amplifier have a headphone output?
Yes, there is a 3.5mm headphone jack on the front panel. Plugging in headphones will mute the speakers.
Can I connect a subwoofer?
The amplifier does not have a dedicated subwoofer output. However, you can connect a powered subwoofer with high-level inputs to the speaker terminals.
Is the amplifier compatible with 4-ohm speakers?
Yes, it is designed to work with 4-ohm or 8-ohm speakers. Using 4-ohm speakers will yield higher power output but ensure adequate ventilation.
User questions about AXAMP-FD1 AXESS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual AXAMP-FD1 - AXESS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AXAMP-FD1 by AXESS.
USER MANUAL AXAMP-FD1 AXESS
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AXESS
Model : AXAMP-FD1
Category : Uncategorized