ToughArmor MB873MP-B - Hard Drive Enclosure Icy Dock - Free user manual and instructions
Find the device manual for free ToughArmor MB873MP-B Icy Dock in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Internal Hard Drive Enclosure (Backplane Module) |
| Supported Drive Size | 3.5 inch SATA HDD/SSD |
| Number of Bays | 8 |
| Host Interface | 8x SATA 6Gbps (per drive) |
| Form Factor | 2x 5.25 inch External Drive Bays |
| Drive Tray | Tray-less, tool-less design |
| Cooling | Dual 40mm ball bearing fans |
| LED Indicators | Power and HDD activity per bay |
| Construction Material | Aluminum body with steel drive trays |
| Dimensions (W x H x D) | 146 x 86 x 190 mm |
| Weight | 1.0 kg (2.2 lbs) |
| Power Supply | Powered via 2x SATA 15-pin power connectors (from host PSU) |
| Hot-Swap Support | Yes, hot-swappable drives |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Compatible Drives | All SATA 1.5/3.0/6.0 Gbps HDD/SSD |
| Safety Certifications | CE, FCC, RoHS |
| Installation | Mounts into two adjacent 5.25-inch external bays |
| Maintenance | Clean with a dry cloth; ensure proper ventilation |
| Warranty | 3-year limited warranty |
Frequently Asked Questions - ToughArmor MB873MP-B Icy Dock
Is the ToughArmor MB873MP-B compatible with SSDs?
Yes, it supports both 3.5-inch SATA HDDs and SSDs at 1.5, 3.0, or 6.0 Gbps.
Does it require any drivers to work?
No, the enclosure is natively supported by your motherboard's SATA controller; no additional drivers are needed.
Can I use the MB873MP-B with SAS drives?
No, it is designed specifically for SATA drives. SAS drives require a SAS controller and may not be electrically compatible.
How many 5.25-inch bays does this device occupy?
It occupies two adjacent 5.25-inch external drive bays in your computer case.
What kind of power connection is needed?
The enclosure requires two SATA 15-pin power connectors from your PSU. Each connector can power up to 4 drives.
Is it hot-swappable?
Yes, the MB873MP-B supports hot-swapping at the drive level. Ensure your operating system and controller support AHCI or hot-plug.
What are the built-in cooling features?
It includes dual 40mm ball bearing fans that provide adequate airflow for all eight drives.
Can I use this in a RAID configuration?
Yes, it is compatible with all RAID controllers (hardware or software) that support SATA drives. The backplane itself does not implement RAID.
How do I install drives without trays?
Drives slide directly into the slots. The tool-less design uses locking mechanisms that secure the drive with no screws required.
What if a drive fails? Can I replace it without powering down?
Yes, with hot-swap support, you can remove and replace a failed drive without shutting down the system, assuming your RAID or OS is configured correctly.
User questions about ToughArmor MB873MP-B Icy Dock
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Hard Drive Enclosure in PDF format for free! Find your manual ToughArmor MB873MP-B - Icy Dock and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ToughArmor MB873MP-B by Icy Dock.
USER MANUAL ToughArmor MB873MP-B Icy Dock
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Icy Dock
Model : ToughArmor MB873MP-B
Category : Hard Drive Enclosure