Pro3 - Audio Ocean Way Audio - Free user manual and instructions
Find the device manual for free Pro3 Ocean Way Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 3-Way Studio Monitor |
| Brand | Ocean Way Audio |
| Model | Pro3 |
| Dimensions (H x W x D) | 610 mm x 380 mm x 320 mm |
| Weight | 28 kg each |
| Power Amplifier | Built-in tri-amped: 400W LF + 200W MF + 100W HF |
| Frequency Response | 30 Hz - 25 kHz (±2 dB) |
| Low-Frequency Driver | 12-inch paper cone with 4-inch voice coil |
| Mid-Frequency Driver | 5-inch magnesium cone |
| High-Frequency Driver | 1-inch neodymium tweeter with waveguide |
| Crossover Frequencies | 300 Hz and 2.5 kHz |
| Maximum SPL | 120 dB peak |
| Input Connectors | XLR and TRS balanced |
| Input Impedance | 20 kΩ balanced |
| Input Sensitivity | +4 dBu nominal |
| Power Requirements | 100-240 V AC, 50/60 Hz |
| Power Consumption | 500 W maximum |
| Enclosure Type | Sealed cabinet with internal bracing |
| Finish | Black textured vinyl |
| Protection Features | Over-current, over-voltage, thermal limiting |
| Recommended Usage | Professional mixing and mastering |
| Cleaning Instructions | Wipe with dry cloth; avoid solvents |
| Warranty | 5 years |
Frequently Asked Questions - Pro3 Ocean Way Audio
How do I connect the Pro3 to my audio interface?
Use a balanced XLR or TRS cable from your interface's output to the Pro3's input. Ensure the interface is set to +4 dBu output level.
What is the recommended placement for the Pro3?
Place the monitors at ear level, forming an equilateral triangle with your listening position. Keep them away from walls to avoid bass buildup.
Can I use the Pro3 in a home theater setup?
Yes, they work well as front speakers in a high-end home theater, but they are designed for near-field monitoring.
How often should I clean the Pro3?
Wipe the cabinet with a dry microfiber cloth as needed. Do not use liquid cleaners or spray directly onto the drivers.
What is the power consumption of the Pro3?
The maximum power consumption is 500 W. In idle, it consumes less than 50 W.
Does the Pro3 have a standby mode?
Yes, the amplifier enters standby after 20 minutes of no signal. It wakes up automatically when signal is detected.
What drivers are used in the Pro3?
It features a 12-inch paper cone woofer, a 5-inch magnesium cone midrange, and a 1-inch neodymium tweeter.
Can I replace the drivers myself?
Driver replacement should be done by a qualified technician to avoid damage to the cabinet or crossovers. Contact Ocean Way Audio support.
What is the frequency response of the Pro3?
The frequency response is 30 Hz to 25 kHz with a tolerance of ±2 dB.
Is the Pro3 magnetically shielded?
No, the Pro3 is not magnetically shielded. Keep it at least 30 cm away from CRT monitors or magnetic media.
User questions about Pro3 Ocean Way Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Audio in PDF format for free! Find your manual Pro3 - Ocean Way Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Pro3 by Ocean Way Audio.
USER MANUAL Pro3 Ocean Way Audio
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Ocean Way Audio
Model : Pro3
Category : Audio