Spike SPK-V12 - Subwoofer AudioControl - Free user manual and instructions
Find the device manual for free Spike SPK-V12 AudioControl in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Powered Subwoofer |
| Driver Size | 12 inches |
| Amplifier Type | Class D |
| RMS Power | 500 Watts |
| Peak Power | 1000 Watts |
| Impedance | 4 ohms |
| Frequency Response | 20 Hz - 200 Hz |
| Enclosure Type | Ported |
| Input Connections | RCA line level, Speaker level |
| Variable Low-Pass Filter | 50 Hz - 200 Hz |
| Phase Control | 0° / 180° switchable |
| Remote Level Control | Included (wired) |
| Auto Turn-On | Signal sensing (12V DC trigger optional) |
| Dimensions (H x W x D) | 15.5 x 15.5 x 16.5 inches |
| Weight | 32 lbs (14.5 kg) |
| Power Supply | 12V DC (vehicle battery) |
| Fuse Rating | 30A (ATC blade) |
| Cleaning Instructions | Wipe enclosure with dry cloth; avoid liquids |
| Safety Precautions | Secure subwoofer in vehicle; prevent short circuits |
| Spare Parts Availability | Contact AudioControl customer service |
| Repair Information | Authorized service centers only; do not disassemble |
Frequently Asked Questions - Spike SPK-V12 AudioControl
How do I connect the Spike SPK-V12 to my car stereo?
Connect the speaker level inputs to your existing speaker wires, or use RCA cables from the subwoofer output of your head unit. Ensure the remote turn-on wire (blue) is connected to a 12V trigger source.
What is the recommended amplifier setting for the subwoofer?
Set the low-pass filter to around 80 Hz for seamless integration with your main speakers. Adjust the gain to match the output of your head unit, starting at minimum and increasing slowly to avoid distortion.
Can I use this subwoofer in a home theater system?
The Spike SPK-V12 is designed for 12V DC automotive use and cannot be directly connected to a home AC outlet without a high-current 12V power supply and appropriate signal conversion.
Why is my subwoofer not turning on?
Check the fuse (30A) and ensure the remote turn-on wire receives 12V when the stereo is on. Also verify that the ground connection is solid and the power wire is connected to the battery positive terminal.
What is the correct impedance for wiring multiple subwoofers?
The Spike SPK-V12 has a single 4-ohm voice coil. For multiple subwoofers, you would need to wire them in series or parallel to achieve a safe load for your amplifier (e.g., two units in parallel give 2 ohms).
How do I clean the subwoofer enclosure?
Wipe the exterior with a soft, dry cloth. Do not use any liquids or harsh chemicals as they may damage the finish or seep into the electronics.
Can I replace the driver (speaker) myself?
We recommend contacting AudioControl or an authorized service center. The enclosure is designed for a specific driver and amplifier module; improper replacement may affect performance or cause damage.
What is the auto turn-on feature and how do I use it?
The subwoofer can turn on automatically when it detects an audio signal on the speaker-level inputs. If using RCA, you need to connect the remote wire. The auto turn-on can be set to signal sense or 12V trigger via a switch.
How do I adjust the phase control?
The phase control allows you to invert the subwoofer's output by 180 degrees. Listen to your system and select the setting that produces the strongest bass at your listening position, typically with the subwoofer near the main speakers.
Where can I find the user manual?
The user manual is available for free download on notice-facile.com in PDF format. You can also request a translated version by selecting your language and providing your email.
User questions about Spike SPK-V12 AudioControl
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Subwoofer in PDF format for free! Find your manual Spike SPK-V12 - AudioControl and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Spike SPK-V12 by AudioControl.
USER MANUAL Spike SPK-V12 AudioControl
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AudioControl
Model : Spike SPK-V12
Category : Subwoofer