TXJWB12 - Subwoofer AudioControl - Free user manual and instructions
Find the device manual for free TXJWB12 AudioControl in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Subwoofer |
| Brand | AudioControl |
| Model | TXJWB12 |
| Speaker Size | 12 inches (30.5 cm) |
| Impedance | 4 ohms |
| RMS Power Handling | 300 Watts |
| Peak Power Handling | 600 Watts |
| Frequency Response | 20 Hz - 200 Hz |
| Sensitivity | 87 dB (1W/1m) |
| Mounting Depth | 6.25 inches (15.9 cm) |
| Mounting Diameter | 10.85 inches (27.6 cm) |
| Enclosure Recommendation | Sealed or ported, 1.2-2.0 cu.ft (sealed), 1.5-2.5 cu.ft (ported) |
| Displacement | 0.12 cu.ft (3.4 liters) |
| Magnet Weight | 80 oz. (2.27 kg) |
| Cone Material | Polypropylene with rubber surround |
| Voice Coil | 2-inch (5.1 cm) copper |
| Weight | 12 lbs (5.44 kg) |
| Maintenance | Wipe with dry cloth; do not use solvents. |
| Safety | Ensure secure mounting; avoid over-powering. |
| Spare Parts | Contact AudioControl customer service for replacement parts. |
| Repairability | Professional reconing service recommended; DIY not advised. |
Frequently Asked Questions - TXJWB12 AudioControl
What is the impedance of the AudioControl TXJWB12 subwoofer?
The TXJWB12 has a nominal impedance of 4 ohms, suitable for most car audio amplifiers in bridged or stereo mode.
What is the power handling of the TXJWB12?
It handles 300 Watts RMS and 600 Watts peak. Ensure your amplifier delivers RMS power within this range for optimal performance.
What size enclosure should I use for the TXJWB12?
For a sealed enclosure, use 1.2-2.0 cu.ft (internal volume). For a ported enclosure, use 1.5-2.5 cu.ft with a 4-inch port tuned to 32-35 Hz.
Does the TXJWB12 require a break-in period?
Yes, it is recommended to play the subwoofer at moderate volume for 10-20 hours to loosen the suspension and achieve optimal sound quality.
What is the mounting depth of the TXJWB12?
The mounting depth is 6.25 inches (15.9 cm). Verify that your enclosure or mounting location has adequate clearance.
Can I use the TXJWB12 in a free-air (infinite baffle) setup?
It is designed for enclosed use (sealed or ported). Free-air operation may cause damage due to lack of damping.
How do I clean the TXJWB12 subwoofer?
Gently wipe the cone and surround with a soft, dry cloth. Avoid using water, solvents, or abrasive cleaners.
What type of amplifier should I use with the TXJWB12?
Use a mono or bridged stereo amplifier that delivers 300-600 Watts RMS at 4 ohms. Match the amplifier's impedance and power ratings.
Is the TXJWB12 compatible with high-level (speaker level) inputs?
Yes, when used with an amplifier that has high-level inputs or a separate line-out converter. The subwoofer itself requires amplified signal.
What is the warranty on the AudioControl TXJWB12?
AudioControl typically offers a 1-year limited warranty against defects. Register your product on their website for warranty service.
User questions about TXJWB12 AudioControl
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Subwoofer in PDF format for free! Find your manual TXJWB12 - AudioControl and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TXJWB12 by AudioControl.
USER MANUAL TXJWB12 AudioControl
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AudioControl
Model : TXJWB12
Category : Subwoofer