X2i - Loudspeaker BLUEANT - Free user manual and instructions
Find the device manual for free X2i BLUEANT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable Bluetooth Speaker |
| Brand | BlueAnt |
| Model | X2i |
| Dimensions (H x W x D) | 170 x 60 x 60 mm |
| Weight | 340 g |
| Power Supply | Built-in rechargeable Li-ion battery via micro-USB |
| Battery Life | Up to 6 hours |
| Bluetooth Version | Bluetooth 4.0 |
| Water Resistance | IPX7 (submersible up to 1m for 30 min) |
| Speakerphone | Yes, with built-in microphone |
| Output Power | 3W RMS |
| Frequency Range | 150 Hz - 20 kHz |
| Connectivity | Bluetooth wireless, 3.5mm aux input |
| Controls | Power, volume up/down, play/pause, call answer/end |
| Carrying Method | Integrated carabiner clip |
| Color Options | Black, Red, Blue |
| Cleaning Instructions | Wipe with a soft, dry cloth; do not use harsh chemicals |
| Maintenance | Keep charging port dry; store in cool place |
| Safety Warnings | Do not expose to extreme heat or direct sunlight for long periods |
| Spare Parts / Repairability | Battery not user-replaceable; contact BlueAnt for service |
| Included Accessories | Micro-USB charging cable, user manual |
| Warranty | 1 year limited |
Frequently Asked Questions - X2i BLUEANT
How do I pair the X2i with my phone?
Turn on the X2i and press and hold the Bluetooth button until the LED flashes quickly. Enable Bluetooth on your phone and select 'BlueAnt X2i' from the list. Once connected, the LED will stay solid.
Is the X2i waterproof?
Yes, the X2i has an IPX7 rating, meaning it can be submerged in water up to 1 meter for 30 minutes. However, ensure the charging port cover is sealed.
How long does the battery last?
The battery provides up to 6 hours of playback at moderate volume. Charging time is approximately 2 hours via micro-USB.
Can I use the X2i as a speakerphone?
Yes, the X2i has a built-in microphone. When a call comes in, press the play/pause button to answer. Press it again to end the call. You can also reject a call by holding the button.
How do I reset the X2i?
To reset, turn off the speaker. Then press and hold the power button and the volume up button simultaneously for about 5 seconds until you hear a tone. The speaker will turn on and be in pairing mode.
Can I connect multiple devices at once?
No, the X2i connects to one device at a time. However, you can easily switch by disconnecting from the current device and pairing with a new one.
What should I do if the sound is distorted?
Lower the volume on both the speaker and your source device. Ensure the speaker is not placed on a surface that vibrates excessively. Also, check if the battery is low.
How do I charge the X2i?
Use the included micro-USB cable. Connect it to the charging port on the speaker, and plug the other end into a USB power source. The LED turns red while charging and turns off when fully charged.
Is the X2i compatible with all Bluetooth devices?
The X2i uses Bluetooth 4.0 and is compatible with most smartphones, tablets, and computers that support A2DP and HFP profiles.
Can I use the X2i while it is charging?
Yes, you can play music while charging. However, be careful not to expose the open charging port to water.
User questions about X2i BLUEANT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual X2i - BLUEANT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. X2i by BLUEANT.
USER MANUAL X2i BLUEANT
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BLUEANT
Model : X2i
Category : Loudspeaker