X-3D - Loudspeaker BLUEANT - Free user manual and instructions
Find the device manual for free X-3D BLUEANT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable Bluetooth Speaker |
| Brand | BlueAnt |
| Model | X-3D |
| Dimensions (H x W x D) | 7.5 cm x 7.5 cm x 7.5 cm |
| Weight | 0.45 kg |
| Power Supply | Built-in Li-ion battery (7.4V, 2000mAh) |
| Battery Life | Up to 12 hours at moderate volume |
| Charging Time | Approximately 2-3 hours via USB-C |
| Bluetooth Version | 5.0 |
| Wireless Range | Up to 10 meters (33 feet) |
| Speaker Driver | 40 mm full-range driver |
| Output Power | 10W RMS |
| Frequency Response | 80 Hz - 20 kHz |
| Water Resistance | IPX5 (splash-proof) |
| Microphone | Built-in for hands-free calls |
| Controls | Power, Volume +/-, Play/Pause, Multi-function button |
| Connectivity | Bluetooth, 3.5 mm aux input (cable included) |
| Compatible Devices | Smartphones, tablets, laptops, etc. |
| Maintenance | Clean with a dry, soft cloth. Do not use chemicals. |
| Safety Precautions | Do not immerse in water. Avoid extreme temperatures. |
| Spare Parts Availability | Contact BlueAnt customer service or authorized dealers. |
Frequently Asked Questions - X-3D BLUEANT
How do I pair the BlueAnt X-3D with my phone?
Turn on the speaker. It will enter pairing mode automatically (indicated by blinking blue light). On your device, enable Bluetooth and select BlueAnt X-3D from the list. If prompted, enter 0000 as the PIN.
How long does the battery last on a full charge?
The battery lasts up to 12 hours at moderate volume levels. Actual battery life may vary depending on volume and audio content.
How do I reset the BlueAnt X-3D to factory settings?
Press and hold the Power and Volume Up(+) buttons simultaneously for 5 seconds until you hear a tone. The speaker will reset and enter pairing mode.
Is the BlueAnt X-3D waterproof?
It has an IPX5 rating, meaning it is splash-proof and can withstand water jets from any direction, but it should not be submerged.
Can I use the speaker while it is charging?
Yes, you can use the speaker while it is charging via the USB-C port. However, charging may take longer if you play music at high volume.
What if the speaker does not connect to my device?
Ensure the speaker is in pairing mode (blinking blue light). On your device, go to Bluetooth settings, forget the device, then search again. Also, check if the speaker is already connected to another device.
How do I adjust the volume?
Press the Volume Up(+) or Volume Down(-) buttons on the speaker. You can also adjust volume from your connected device.
Can I use the BlueAnt X-3D for hands-free calls?
Yes, the speaker has a built-in microphone. When a call comes in, press the Multi-function button to answer. Press again to end.
What is the charging time and how do I know it's fully charged?
Charging takes approximately 2-3 hours via USB-C. The LED indicator turns from red (charging) to blue/off when fully charged.
How do I clean the BlueAnt X-3D?
Use a soft, dry cloth to wipe the exterior. Do not use any solvents or abrasive cleaners. Avoid getting moisture into the ports.
User questions about X-3D BLUEANT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual X-3D - BLUEANT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. X-3D by BLUEANT.
USER MANUAL X-3D BLUEANT
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BLUEANT
Model : X-3D
Category : Loudspeaker