KSV35CRH - Air Conditioning KELVINATOR - Free user manual and instructions
Find the device manual for free KSV35CRH KELVINATOR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Kelvinator |
| Model | KSV35CRH |
| Product Type | Split Air Conditioner (Cooling Only) |
| Cooling Capacity | 3.5 kW (12,000 BTU/h) |
| Energy Efficiency Ratio (EER) | 3.2 W/W |
| Power Supply | 220-240 V / 50 Hz, 1 Phase |
| Indoor Unit Dimensions (W x H x D) | 820 x 275 x 205 mm |
| Outdoor Unit Dimensions (W x H x D) | 700 x 550 x 260 mm |
| Indoor Unit Weight | 10 kg |
| Outdoor Unit Weight | 28 kg |
| Refrigerant Type | R410A |
| Operating Modes | Cool, Fan, Dry (Dehumidify) |
| Fan Speeds | 3 (Low, Medium, High) + Auto |
| Airflow Rate (Indoor) | 8.5 m³/min |
| Noise Level (Indoor) | 28-40 dB(A) |
| Noise Level (Outdoor) | 52 dB(A) |
| Filter Type | Washable Mesh Filter |
| Timer | 24-hour programmable timer |
| Remote Control | Yes (Infrared) |
| Self-Diagnosis | Yes (Error code display) |
| Air Purification | Not specified (basic filtration) |
| Installation Type | Wall-mounted indoor unit, ground or wall-mounted outdoor |
| Recommended Room Size | Up to 25-30 m² |
Frequently Asked Questions - KSV35CRH KELVINATOR
How do I clean the air filter?
Turn off the unit and open the front panel. Remove the filter and wash it with warm water and mild detergent. Let it dry completely before reinstalling. Clean every 2 weeks during heavy use.
What does the error code 'E1' mean?
Error code E1 indicates a problem with the indoor temperature sensor. Please contact a qualified technician for repair.
Can I use an extension cord with the air conditioner?
No, we strongly recommend against using an extension cord. Plug the unit directly into a dedicated wall outlet rated for 15A or higher.
How often should I service the unit?
Have a professional service the air conditioner at least once a year before the cooling season. This includes checking refrigerant pressure, cleaning coils, and inspecting electrical connections.
The remote control is not working. What should I do?
First, replace the batteries. Ensure the remote is pointed at the indoor unit's receiver. If it still doesn't work, try resetting the unit by turning it off at the circuit breaker for 1 minute.
What is the correct temperature setting for cooling?
For energy efficiency and comfort, set the thermostat to 24-26°C (75-78°F) in cooling mode. Each degree lower increases energy consumption by about 8%.
Why is water dripping from the indoor unit?
Check if the drain hose is blocked or kinked. Also ensure the unit is level. If the problem persists, the drain pan may be cracked; contact a technician.
Can I install the air conditioner myself?
Installation should be performed by a qualified professional due to the need for refrigerant handling, electrical work, and proper drainage. Improper installation may void the warranty.
What does 'Dry' mode do?
Dry mode reduces humidity without significantly lowering the temperature. The fan runs at low speed and the compressor cycles on and off to remove moisture from the air.
How do I reset the unit after a power outage?
Simply turn the unit off and on using the remote or the power button on the indoor unit. If the unit does not respond, unplug it for 5 minutes and plug it back in.
User questions about KSV35CRH KELVINATOR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air Conditioning in PDF format for free! Find your manual KSV35CRH - KELVINATOR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KSV35CRH by KELVINATOR.
USER MANUAL KSV35CRH KELVINATOR
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : KELVINATOR
Model : KSV35CRH
Category : Air Conditioning