KSV50HWH - Air conditioner KELVINATOR - Free user manual and instructions
Find the device manual for free KSV50HWH KELVINATOR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Kelvinator |
| Model | KSV50HWH |
| Product Type | Split System Air Conditioner |
| Cooling Capacity | 5,000 BTU/h (approx. 1.5 kW) |
| Heating Capacity | Not applicable (cooling only) |
| Energy Efficiency Ratio (EER) | 3.0 (approx.) |
| Power Supply | 230V ~ 50Hz, 1 Phase |
| Rated Current (Cooling) | 3.5 A |
| Refrigerant Type | R32 |
| Indoor Unit Dimensions (W x H x D) | 745 x 250 x 200 mm |
| Outdoor Unit Dimensions (W x H x D) | 700 x 550 x 250 mm |
| Indoor Unit Weight | 9.0 kg |
| Outdoor Unit Weight | 28.0 kg |
| Air Flow Rate (High) | 400 m³/h |
| Noise Level (Indoor) | 30 dB(A) (low), 40 dB(A) (high) |
| Noise Level (Outdoor) | 52 dB(A) |
| Remote Control | Yes, with LCD display |
| Timer Function | 24-hour timer |
| Sleep Mode | Yes, auto temperature adjustment |
| Air Filter | Washable mesh filter |
| Maintenance | Clean filter every 2 weeks |
| Safety Features | Auto restart, overheat protection, compressor delay |
| Spare Parts Available | Filters, remote control, fan motor |
Frequently Asked Questions - KSV50HWH KELVINATOR
How do I clean the air filter?
Turn off the unit and unplug it. Open the front panel, remove the filter, and wash it with warm water and mild detergent. Let it dry completely before reinstalling. Clean every two weeks for optimal performance.
Why is my air conditioner not cooling?
Check if the filter is dirty (clean it). Ensure the thermostat is set lower than room temperature. Verify that the outdoor unit is not blocked by debris. If the problem persists, the refrigerant may be low; contact a professional.
What does the 'Sleep' mode do?
Sleep mode gradually increases the set temperature by 1-2°C over a few hours to save energy and prevent overcooling while you sleep. The fan speed may also decrease for quieter operation.
Can I install the air conditioner myself?
No, installation should be done by a qualified technician to ensure proper refrigerant handling, electrical connections, and drainage. Improper installation may void the warranty.
How do I set the timer?
Press the 'Timer' button on the remote. Use the +/- buttons to set the desired on/off time. Confirm by pressing 'Set' or 'OK'. The display will show the timer icon.
Why is water leaking from the indoor unit?
A clogged condensate drain is the most common cause. Turn off the unit and check the drain pipe for blockages. Also ensure the unit is level. If the problem continues, call a technician.
What type of refrigerant does this model use?
This model uses R32 refrigerant, which is more environmentally friendly than older types. Always use a certified technician for service involving refrigerant.
How do I use the remote control?
Insert two AAA batteries into the remote. Point it at the indoor unit's receiver. Use the buttons to set mode (Cool, Dry, Fan), temperature, fan speed, and timer. Keep the remote within 8 meters of the unit.
Is there a warranty on this air conditioner?
Yes, Kelvinator offers a standard 1-year warranty on parts and labor. Some components like the compressor may have longer coverage. Check your purchase documents for details.
What does the 'Auto' mode do?
In Auto mode, the unit automatically selects between cooling and fan only based on the room temperature relative to the set temperature. It maintains the set temperature without manual switching.
User questions about KSV50HWH KELVINATOR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air conditioner in PDF format for free! Find your manual KSV50HWH - KELVINATOR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KSV50HWH by KELVINATOR.