S-6VC - Uncategorized JobSite - Free user manual and instructions
Find the device manual for free S-6VC JobSite in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Circular Saw |
| Model | S-6VC |
| Brand | JobSite |
| Dimensions (L x W x H) | 400 x 250 x 300 mm |
| Weight | 5.5 kg |
| Power Source | Electric Corded |
| Power Consumption | 1200 W |
| Blade Diameter | 190 mm |
| Max Cutting Depth at 90° | 65 mm |
| Max Cutting Depth at 45° | 45 mm |
| No-Load Speed | 5500 rpm |
| Main Functions | Cutting wood, plastic, and metal |
| Safety Features | Blade guard, electric brake, safety switch |
| Maintenance | Clean dust after use, lubricate gears |
| Spare Parts Availability | Blades, brushes, carbon brushes |
| Warranty | 2 years |
| Manual Languages | English |
Frequently Asked Questions - S-6VC JobSite
How do I change the blade on the JobSite S-6VC?
Unplug the saw, lock the spindle using the spindle lock, loosen the arbor nut with the wrench, remove the old blade, and install the new one with teeth facing forward. Tighten the nut securely.
What safety precautions should I take?
Always wear safety goggles and ear protection. Keep the blade guard in place. Never operate without the guard. Disconnect power before blade changes.
Can the S-6VC cut metal?
Yes, with an appropriate metal cutting blade. Ensure the blade is rated for the material and reduce the feed rate.
What is the maximum cutting depth?
At 90°, the maximum cutting depth is 65 mm. At 45°, it is 45 mm.
How do I adjust the cutting depth?
Loosen the depth adjustment lever located near the base plate, slide the base to the desired depth, then tighten the lever.
Why is the saw not starting?
Check the power cord for damage, ensure the plug is firmly inserted, and verify the circuit breaker hasn't tripped. Also, check if the safety switch is engaged.
How often should I replace the carbon brushes?
Inspect brushes every 50 hours of use. Replace them if they are worn below the indicator line or if the saw loses power.
What type of power cord does it use?
It uses a standard 120V/60Hz power cord with a grounded plug. For outdoor use, use an extension cord rated for the amperage.
Is the saw compatible with a dust collection system?
Yes, the S-6VC has a dust port that fits a standard 35mm vacuum hose for dust extraction.
Where can I find replacement parts?
Replacement parts such as blades and brushes are available at authorized JobSite dealers or online through the official website.
User questions about S-6VC JobSite
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual S-6VC - JobSite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. S-6VC by JobSite.
USER MANUAL S-6VC JobSite
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : JobSite
Model : S-6VC
Category : Uncategorized