Smart App PR2000RT2UCN - Inverter CyberPower - Free user manual and instructions
Find the device manual for free Smart App PR2000RT2UCN CyberPower in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Uninterruptible Power Supply (UPS) |
| Model | Smart App PR2000RT2UCN |
| Brand | CyberPower |
| Form Factor | Rackmount (2U) |
| Power Capacity (VA) | 2000 VA |
| Power Capacity (Watts) | 1800 W |
| Topology | Double Conversion (Online) |
| Input Voltage | 120 V AC |
| Output Voltage | 120 V AC |
| Output Frequency | 60 Hz |
| Number of Outlets | 8 (NEMA 5-15R) |
| Battery Type | Sealed Lead-Acid (SLA) |
| Battery Voltage | 24 V DC |
| Typical Runtime (Half Load) | Approximately 30 minutes |
| Typical Runtime (Full Load) | Approximately 8 minutes |
| Dimensions (W x H x D) | 17.3 x 3.5 x 16.5 inches (rack unit) |
| Weight | 55 lbs (25 kg) |
| Communication Ports | USB, RS-232, EPO |
| Management Software | PowerPanel Business Edition |
| Safety Features | Overload protection, surge protection, EMI/RFI filtering |
| Maintenance | User-replaceable battery, periodic cleaning with dry cloth |
Frequently Asked Questions - Smart App PR2000RT2UCN CyberPower
What is the typical runtime of the CyberPower Smart App PR2000RT2UCN?
At half load (900W), the runtime is approximately 30 minutes. At full load (1800W), it drops to about 8 minutes. Actual runtime may vary based on battery age and conditions.
How do I connect the UPS to my computer?
Use the included USB cable to connect the UPS to your computer. Install the PowerPanel Business Edition software for monitoring and automatic shutdown.
Can I replace the battery myself?
Yes, the battery is user-replaceable. Open the front panel, disconnect the battery connector, and slide out the old battery. Insert a new battery of the same type (24V SLA) and reassemble.
What outlets does this UPS provide?
It has 8 NEMA 5-15R outlets, which are standard 120V, 15A receptacles. They provide battery backup and surge protection.
What is a double-conversion UPS?
A double-conversion UPS, also known as online UPS, continuously converts incoming AC to DC and then back to AC. This provides clean, stable power with zero transfer time during outages.
How do I perform a self-test?
Press and hold the test button on the front panel for about 2 seconds. The UPS will run a self-test. You can also schedule tests via the PowerPanel software.
Is the UPS network manageable?
Yes, it supports USB and RS-232 connections. With an optional SNMP card, it can be managed over a network using the PowerPanel software.
What should I do if the UPS emits an alarm?
Check the front panel LED indicators. A continuous alarm usually indicates a battery fault or overload. Reduce the load or replace the battery if needed.
Can I rackmount this UPS?
Yes, it is designed for 2U rackmount installation. It comes with rack ears and rails for mounting in a standard 19-inch rack.
How do I clean the UPS?
Unplug the UPS and wipe the exterior with a dry, soft cloth. Do not use liquids or cleaners. Ensure vents are free from dust to maintain airflow.
User questions about Smart App PR2000RT2UCN CyberPower
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Inverter in PDF format for free! Find your manual Smart App PR2000RT2UCN - CyberPower and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Smart App PR2000RT2UCN by CyberPower.
USER MANUAL Smart App PR2000RT2UCN CyberPower
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : CyberPower
Model : Smart App PR2000RT2UCN
Category : Inverter