Smart App Sinewave PR3000RTXL2UN - Inverter CyberPower - Free user manual and instructions
Find the device manual for free Smart App Sinewave PR3000RTXL2UN CyberPower in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Uninterruptible Power Supply (UPS) |
| Series | Smart App Sinewave |
| Topology | Line-interactive |
| Waveform | Pure sine wave |
| Power Rating | 3000 VA / 2700 W |
| Rack Height | 2U |
| Form Factor | Rack/Tower convertible |
| Input Voltage | 120 VAC |
| Output Voltage | 120 VAC |
| Frequency | 50/60 Hz (auto-sensing) |
| Battery Type | Sealed lead-acid, 12V / 9Ah |
| Number of Batteries | 6 |
| Typical Runtime | Approximately 10 minutes at half load (expandable with external battery packs) |
| LCD Display | Yes, with status and control interface |
| Communication Ports | USB, Serial, SNMP slot |
| Software | PowerPanel Business Edition |
| Protection | Surge protection, overload protection, short-circuit protection |
| Cooling | Smart ventilated fan |
| Dimensions (W x H x D) | 17.2 x 3.5 x 19.6 inches (438 x 89 x 498 mm) |
| Weight | 63.9 lbs (29 kg) |
| Safety Certifications | UL, cUL |
| Warranty | 3 years (including batteries) |
| Maintenance | Dust with dry cloth; ensure proper ventilation |
| Safety Precautions | Do not expose to moisture; avoid overloading; battery replacement by qualified personnel |
| Spare Parts & Repairability | Batteries, fans, and internal modules are replaceable by qualified service technicians |
Frequently Asked Questions - Smart App Sinewave PR3000RTXL2UN CyberPower
How do I install the CyberPower Smart App Sinewave PR3000RTXL2UN?
Installation involves rack or tower mounting, connecting the input power cord to a grounded outlet, and connecting devices to the output receptacles. For detailed steps, refer to the user manual included with the UPS.
What is the battery runtime of the PR3000RTXL2UN?
At half load (1350W), the internal batteries provide approximately 10 minutes of runtime. With optional external battery packs, the runtime can be extended significantly, depending on the number of packs added.
Can I monitor this UPS over the network?
Yes, the UPS has a SNMP slot for an optional network management card, allowing remote monitoring and management via the network. It also includes USB and serial ports for direct connection to a host system.
What maintenance does the UPS require?
Regularly dust the exterior with a dry cloth and ensure the vents are not blocked. Check the battery health via the LCD or PowerPanel software. Batteries should be replaced every 2-3 years or as needed, by a qualified technician.
How do I replace the batteries?
Battery replacement should be performed by qualified personnel. The UPS has a hot-swappable battery design, meaning you can replace the battery module while the UPS is in operation. Follow the instructions in the manual to safely remove and install the new battery module.
What is the transfer time when power fails?
The line-interactive topology provides a typical transfer time of 2 to 4 milliseconds, ensuring a seamless switch to battery power without interrupting connected equipment.
Can I use this UPS with a generator?
Yes, the PR3000RTXL2UN is designed to handle a wide input frequency range and works with generators. The auto-sensing frequency (50/60 Hz) allows the UPS to accept power from a generator, though ensure the generator is sufficiently sized for the load.
What do the audible alarms on the UPS indicate?
Alarms indicate different conditions: a steady beep along with the battery LED indicates battery mode, an intermittent beep with overload LED indicates overload. The exact alarm codes are explained in the manual, and the LCD also displays the status message.
Does the UPS provide pure sine wave output?
Yes, the Smart App Sinewave series produces a pure sine wave output, which is essential for sensitive electronic devices, ensuring clean and reliable power during outages and poor input power conditions.
How do I update the firmware of the UPS?
Firmware updates are performed using the PowerPanel Business Edition software, available from the CyberPower website. Connect the UPS via USB to a computer, open the software, and follow the firmware update instructions in the user manual.
User questions about Smart App Sinewave PR3000RTXL2UN CyberPower
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Inverter in PDF format for free! Find your manual Smart App Sinewave PR3000RTXL2UN - CyberPower and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Smart App Sinewave PR3000RTXL2UN by CyberPower.
USER MANUAL Smart App Sinewave PR3000RTXL2UN CyberPower
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : CyberPower
Model : Smart App Sinewave PR3000RTXL2UN
Category : Inverter