OLS10000EXL - Inverter CyberPower - Free user manual and instructions
Find the device manual for free OLS10000EXL CyberPower in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | UPS (Uninterruptible Power Supply) |
| Model | OLS10000EXL |
| Brand | CyberPower |
| Capacity | 10000 VA / 9000 W |
| Topology | Double Conversion (Online) |
| Input Voltage | 208-240 V AC |
| Output Voltage | 208-240 V AC |
| Frequency | 50/60 Hz (auto-sensing) |
| Battery Type | Sealed Lead-Acid (SLA) |
| Battery Quantity | External battery pack required (EBM series) |
| Outlets | 2 x IEC C13 (10A), 2 x IEC C19 (16A) |
| Communication Ports | USB, RS-232, EPO (Emergency Power Off), SNMP slot |
| Dimensions (W x D x H) | 17.2 x 25.6 x 13.0 inches (437 x 650 x 330 mm) |
| Weight | 110 lbs (49.9 kg) |
| Noise Level | < 55 dBA |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Form Factor | Rackmount / Tower convertible |
| Warranty | 3 years |
Frequently Asked Questions - OLS10000EXL CyberPower
How do I connect the UPS to my equipment?
Connect your devices to the UPS output outlets (IEC C13 and C19). For initial setup, plug the UPS into a properly grounded wall outlet, ensure the battery is connected, and press the power button. Refer to the manual for load limits.
What is the typical runtime at half load?
With a 4500W load (half of 9000W), the runtime is approximately 10-15 minutes. Actual runtime depends on battery age and load characteristics. For extended runtime, connect external battery modules (EBM).
How do I replace the batteries?
This model uses external battery packs (EBM). To replace, power off the UPS and disconnect from mains. Open the battery compartment, disconnect old batteries, and install new ones. Follow safety precautions as batteries contain lead and acid.
Can I monitor the UPS via network?
Yes, the OLS10000EXL has a SNMP slot. Install an optional SNMP card to enable remote monitoring and management via network. Also supports USB and RS-232 for local monitoring with PowerPanel software.
What does the EPO port do?
The Emergency Power Off (EPO) port allows connection to a remote switch. When activated, it immediately cuts output power to connected loads, useful for data center safety procedures.
Is this UPS compatible with generators?
The double-conversion design ensures clean output regardless of input quality. It can operate on generator power, but ensure the generator provides stable voltage and frequency within the UPS specification.
How do I interpret the front panel indicators?
The front panel has LED indicators for line mode, battery mode, bypass, and fault. A detailed legend is in the user manual. The LCD display (optional on some models) shows load level, battery capacity, and status messages.
What is the recommended maintenance?
Keep the UPS in a dust-free, well-ventilated area. Check battery connections annually. Replace batteries every 3-5 years. Test the UPS periodically by unplugging mains to verify battery operation.
Can I rack mount this unit?
Yes, the OLS10000EXL is convertible between rackmount and tower. It comes with rackmount brackets and fits standard 19-inch racks, occupying 3U of space. For tower orientation, use the included stands.
What is the transfer time?
As a double-conversion UPS, the transfer time is zero milliseconds because the inverter continuously powers the load. Protection against power fluctuations is seamless.
User questions about OLS10000EXL CyberPower
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Inverter in PDF format for free! Find your manual OLS10000EXL - CyberPower and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. OLS10000EXL by CyberPower.
USER MANUAL OLS10000EXL CyberPower
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : CyberPower
Model : OLS10000EXL
Category : Inverter